Difference between revisions of "Horsepower"

From Torque OBD2 Wiki
Jump to navigationJump to search
(Created page with 'Horsepower and Torque can be measured quite accurately though the app "Torque" === Setting up === It is quite important to fill out the vehicle profile for this with the correc…')
 
(Setting up)
Line 3: Line 3:
  
 
=== Setting up ===
 
=== Setting up ===
It is quite important to fill out the vehicle profile for this with the correct weight of the vehicle - using the manufacturers advertised weight unfortunately won't be close to your real weight as it often does not include differing weights (allot wheels vs steel wheels for example). The most accurate way to weigh your vehicle is on a weighbridge.  
+
It is quite important to fill out the vehicle profile for this with the correct weight of the vehicle - using the manufacturers advertised weight unfortunately won't be close to your real weight as it often does not include differing specifications of the same vehicle (alloy wheels vs steel wheel weights for example). The most accurate way to weigh your vehicle is on a weighbridge.  
  
 
Alternatively, you can approximate from the manufacturers specification, plus your weight, plus the weight of the fuel, plus the weight of any extra equipment in the vehicle.
 
Alternatively, you can approximate from the manufacturers specification, plus your weight, plus the weight of the fuel, plus the weight of any extra equipment in the vehicle.
 
  
 
=== How to do the test ===
 
=== How to do the test ===

Revision as of 22:01, 25 March 2012

Horsepower and Torque can be measured quite accurately though the app "Torque"


Setting up

It is quite important to fill out the vehicle profile for this with the correct weight of the vehicle - using the manufacturers advertised weight unfortunately won't be close to your real weight as it often does not include differing specifications of the same vehicle (alloy wheels vs steel wheel weights for example). The most accurate way to weigh your vehicle is on a weighbridge.

Alternatively, you can approximate from the manufacturers specification, plus your weight, plus the weight of the fuel, plus the weight of any extra equipment in the vehicle.

How to do the test

Firstly, make sure you abide by all local laws and make sure that you are safe at all times!

The test should be performed on a flat track. Going up or down a hill/slope will lead to inaccurate readings.

Start from a slow rolling start (about 5 to 10mph) and accelerate until about 55mph. This will give you the most accurate peak value for your vehicle. If you spin the vehicle wheels then this will cause the figures to over-read.