Custom Init

From Torque OBD2 Wiki
Revision as of 13:36, 12 August 2012 by Ihawkins (talk | contribs) (Created page with 'Some vehicles are not 100% OBD2 compliant, but Torque can still talk to them if the adapter is configured in a certain way. The custom init field allows you to manually configur…')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Some vehicles are not 100% OBD2 compliant, but Torque can still talk to them if the adapter is configured in a certain way.

The custom init field allows you to manually configure the ELM327 adapter for special vehicles. If you are unable to connect using the 'Automatic' method, you may need to use an init from the table below:


Vehicle Make/Model Custom init string
Toyota Celica ZZT230 ATIB 96 \n ATIIA 13 \n ATSH8113F1 \n ATSP A4 \n ATSW00
Toyota Vitz 01.2002 ATSH8213F1 \n ATIB96 \n ATIIA13


The commands are standard ELM327 adapter configuration commands, and can be found on the ELM electronics website


If anyone finds any others, drop an email to ian@prowl.org and I will add them to this table