Difference between revisions of "Bluetooth Adapters"

From Torque OBD2 Wiki
Jump to navigationJump to search
(Working Bluetooth & USB Adapters)
(Working Bluetooth & USB Adapters)
Line 62: Line 62:
 
|On/off switch, link light
 
|On/off switch, link light
 
|$99.99
 
|$99.99
|[http://www.plxdevices.com/forum/index.php Support forums]
+
|There have been some user reports of these adapters being faulty like some of the clone adapters. [http://www.plxdevices.com/forum/index.php Support forums]
 
|-
 
|-
 
|[http://www.ebay.com/ Adapter from China/via ebay/amazon]
 
|[http://www.ebay.com/ Adapter from China/via ebay/amazon]

Revision as of 16:02, 13 September 2012

This is a list of adapters that Torque has been tested with which work with OBD2 compliant vehicles:

(Note: All the adapters offer the same access to all the available OBD2 sensors in the vehicle. The adapters do not determine what sensors are or are not available, they are all the same in this respect)

Working Bluetooth & USB Adapters

Adapter Form factor Other features Cost(at time of writing) Comments
Scantool.net OBDLink MX
Scantoolmx.jpg
Small unit Power, Host, Bluetooth and OBD status lights, High speed PID reading

Device Security

$199.95 Flash upgradable firmware, Powersave/sleep function, Support forums

Reports of good customer support. This is the best adapter if you want the fastest PID read speed. Read speeds can be as fast as 60PIDs/sec over Bluetooth (Tested on a Galaxy S2, CANBUS protocol) This device also offers security to prevent unauthorized use

Scantool.net OBDLink
Scantool.jpg
Adapter and cable (adapter can be separated from cable) Rx/Tx Host<->ECU status lights $149.90(Special offer), $179.90 Normal Flash upgradable firmware, Powersave/sleep function, Support forums

Reports of good customer support. Fast PID read speeds, in excess of 60PIDs/second using a Motorola Xoom and USB

Scantool.net OBDLink
Obdlinksx.jpg
USB Adapter Activity/status light $49.95(Special offer), $74.95 Normal User upgradeable via free downloads, Support forums

Reports of good customer support. Fast PID read speeds, in excess of 50 PIDs/sec with USB to a Motorola Xoom tablet

OBDPros website
Obdpro.jpg
Adapter and cable (adapter can be separated from cable) Rx/Tx Host<->ECU status lights $84.95 + BT option at $74.95 = $159.90 Upgradable firmware

Support Forums

Diamex DX70 & DXM website
Diamex.jpg
Adapter in single unit RX/TX status light, Power Light 149EUR Not the fastest adapter, but good construction, reliable.
PLX Devices Kiwi Bluetooth
Plx.jpg
Adapter and cable (adapter cannot be separated from cable) On/off switch, link light $99.99 There have been some user reports of these adapters being faulty like some of the clone adapters. Support forums
Adapter from China/via ebay/amazon
Clone2.jpg
Clone5.jpg
Clone6.jpg
Single moulded unit (though there are several different coloured 'stickers' used) Rx/Tx Host<->ECU status lights $20.00 to $60.00 Some units seem to suffer poor build quality and reliability issues. Other units are perfectly fine. Make sure you purchase with a buyer who has a decent returns policy should the unit turn out to be defective. If you have connection issues, or displays randomly 'pausing' in the app then it is most likely an adapter issue.

If you are using the USB version of this adapter then be aware that you will need to make sure the adapter uses an FTDI or Prolific usb to serial converter chip and have an android device running Android 3.1 or 4.0(or above) and supports USB host mode - you will also need the Pro version of Torque for USB support (though this will be ported to the lite app eventually)

Adapters that are not currently supported

Adapter Form factor Other features Comments
Garmin EcoRoute Moulded plug attached to cable, not detatchable Works with EcoRoute HD navigation, "offline" data storage Non ELM327 compatible. The protocol was discovered, however the adapter proved to be too slow to be of any use.
GoPoint BT1 Moulded plug Non ELM327 compatible. Currently an unknown adapter protocol