Hi Gilbert wow someone with a BT5 ... please share some more info about the unit and the data you are getting so far the figures you have provid...

Hi Mike Last I was aware you could only use Torque Pro with the WBH BT4 adapter. have a look in this discussion thread

Brendan .... I tried to stick with Torque but in the end I went and tried a ScanGauge and I use it as my everyday OBD2 device. I sometimes use the...

Look at the first 7 lines All the values change except for the speed ... if it was just a case of one value changing I would agree with your statem...

do a search on USB the topic has been covered in other threads USB on Torque requires an FTDI chip so do a search on FTDI as well VW's can be...

wow that's some difference! Can you tell us what protocol and OBD Standard is being used on each vehicle? (look in "Adapter Status")

have a look at both these threads for ideas (use search) Can't connect Tablet ICS 4.0.3 via usb OBD to USB to Micro USB?

Does the video show no lag? I have nothing to compare it to except at the stop sign where it shows a small amount of lag. What does the "Adapter St...

Using Torque Pro on the main screen go to "Adapter Status" and you'll find the info

Quote ... "unfortunately the adapter is not a FTDI chipped USB adapter" The FTDI chip if it was in your ELM adapter would sit between the USB socke...

Do a search for Samsung ... Ian mentioned in one of his posts a bug in the bluetooth driver that Samsung need to fix Do a search for PIN as I thi...

What is urgently required is a basic manual which covers all the basic understanding of what Torque is about and how to set it up and how to configure...

from Ross-Tech Boost Pressure: MB 115 -For boost, you should note the actual pressure with the engine off. This would be the atmospheric pressure ...

sorry ... I thought you got the really nice front page in the Lite version ... it's been a long time since I've used it When you go in to add a dis...

On the main Torque page go in to settings (use the 4 squares icon on the phone) and select "Data Logging & Upload"

When you set up a new display/gauge and you go to add a display ... in the list of displays/gauges there is a "raw data" display that can be used s...

I am still on 1.6.14 and there have been no updates since 17 Aug on Google Play

I am using the pro version to reply when you go into "realtime information" using the default vehicle profile there should be a RPM gauge already s...

the list of sensors in your last post above is the list for the VW is the list of sensors for the GM the same? are you asking how to set up a di...