I think I loaded the .csv without clearing the previous PIDs. It supposedly updated any existing PIDS but that does not seem to be my experience.

Mine works similar to yours. I have loaded a set of custom PIDs for my daily driver and it seems that those are not displayed but a bunch of others a...

Is that reading when connected? I noticed mine drops over time when I remove from the vehicle. Plus, the instant PID's/sec is all over the place. M...

Here are the PIDS I'm using for the Tahoe Hybrid (it is the contents of the custom PID .csv file). Many of these have been tested ... but not all. ...

In the absence of a method of posting an Excel spreadsheet, here is a list of the code used. This may or may not work as shown using Google Sheets (o...

Is there a way to post the excel spreadsheet for others to use? BTW ... it does not use macros.

Capp777 ... I had to edit my last post since it got mangled when I hit submit. It truncated the message for whatever reason. FYI Your insite conf...

So I created a PID to test for Hybrid Battery Inlet Temperature. First I used the equation A*9/5-40 and hit the TEST button. Results: Results f...

My understanding (which is subject to being wrong without notice 🙂 is that the MTH data contains equation info to understand the data returned. In t...

But that deviates from Aberk’s process. Plus I'm under the assumption that the equation is derived solely from the MTH values and does not requir...

For others, here is what worked for me as provided by Torque's export. Note that 7E7 is required to operate properly: "Name", "ShortName", "ModeAndP...

I took the Hybrid for a drive and the Torque app cleared up (sorta) an operational question. By watching the amps as I lightly touched the brakes I n...

Now I see where you got the 7E7. Was not looking at the ScanGauge response. You said ... "Now my question… which module is returning the correct d...

The SOC is 70.02% and that looks more reasonable (I don't have a way to see that the car thinks it is to verify the SOC produced by Torque. THANKS! ...

Auto didn't seem to work as well. I got a No Response message and the bottom line was stopped With the engine running and Torque set to BLANK (not...