Works fine on my truck , but pop up again after a while , we don't have emission testing over here so not really an issue for me

just did a quick check in torque did you try torque scan /can explorer ?and you can send command to the obdlink via the obd terminal

you can use putty it's an old telnet software and send to command to the mx+ you will see all traffic but depend on how old is you car ... i would sa...

maybe something like this

that is not into the standard obdii protocol obdii is mainly anti pollution That is more car specific

i would say try again or check if your version as updated i just updated to android 15 (think it was 15) and the app stil work fine for me

since you have a ford , get the forscan app or pc software you will get ALL the data i still use torque for the day to day, but if you need more ...

just download the forscan app you will get EVERYTHING not the best for day to day , but for debugging it's better they also have the PC app

it may be car specific but personnaly when i needed to add sensor with an arduino i was asking torque for an adress that is not reported by the pcm ...

torque has now an option to handle can bus data just never tried it , you have to create a file to tell torque what data = what sensor and value

if it's an old vehicule the obd port is connected directly to the bus so you can use most obdii to bluetooth adapter to sniff the bus you can c...

i would say no where OBDII is mostly generic you can have specific package to access more data , those are using same bus, and language but are...

i haven't verified with the new version but with the old version my car was not responding the request from torque scan was like 22 22 01 ...

at what adress do you send the request auto ? did you try 7df sometime auto or 7df may not work you have to ask the specifv trans adress i a...

try the forscan app torque is good for day to day but forscan has ALL the data and more for ford product

i would say try the full version lite was from what i know a testing version not always up to date

i just did a quick check the G8 doesn't seem to have wide band sensor , they seem to have the old narrow band o2 ... so you will not get AFR

confirm if it's working with another app and make sure to close any other app than could link to the V gate and dont forget to link the V gate ...

software work fine but there is alots of cheap obdii adapter that just dies and on android from time to time the device the device will get kick...

be more specific what car , year , pid what do you see, what you don't see ect advanced PID are not brand specific they are car specific so...