Thanks Cap.. will do some further testing, consult a scangauge and come back with a definitive answer. Might take a few days though, for the scangauge...

Have the highest recorded value as 7260 (think would have been in the 90's or ealy 100's celcius). Probably need to borrow a scangauge to test this.

Managed to extract the right bytes for both temp sensors. the are E and F for sensor 1, G and H for sensor 2 44C0 is equivalent to 28 degrees ce...

Excellent, now I receive two values in the form of 001122334455 and 6677889900 A= 00 B= 11 C= 22 .. .. G= 66 ? After converting the v...

OK, here are the results: 2182 No response (whether 07E0 or 07E1) 21D9 (Does not matter if I input to the header 07E0 or 07E1) It reads the same...

Actually just tested the A to see if it will be consistent in readings.. Will try the whole formula today and let you know. Thanks for the 7E0 n...

Hi, For 2182 no data. For 21D9, Header 7E1 (or blank), A-38: I'm reading values like -29 on P, then -17 on N, then -11 on R, then -19 on D. ...

Thanks for that.. I've tried 7e1 instead of the Auto for the header. Strange I'm getting changing erratic values, not indicating temperature. ...

Bump.. 🙂

Admin, would you confirm if any x-gage code starting with 07E1 means this PID could not be handled by Torque Pro?