Sorry, never got notified of the reply. This is not for OBD1. No OBD2 adapters will work on OBD1.

"But will there be a problem if the phone number for the phone is changed?" How much more clear can this be? I have NEVER had a phone number on tha...

OMG! it's only a measly five bucks! I first installed Torque Pro on a used Android phone that I got at a yard sale. While I have owned it (maybe 3 ye...

I have Torque Pro installed on my old phone and it still works even though it hasn't been connected to a data service or wifi for over a year.

There is a way to check for proper operation: Unplug the TPS (throttle position sensor) and crank the engine briefly. Check for codes using the manufa...

It's possible the hardware you have is not ELM327-based, as Torque requires. I could not find anything definitive on that online and some reviews hint...

This is for GM late 90's, not sure about later years: "MAF Frequency Hz", "MAF Freq", "221250", "(A*256)+B", 0, 31999, "Hz", "Auto"

Th lack of support isn't really with Torque. It is with the ELM327 chip limitations. The protocol is dependent on that chip. You might ask the folks a...

It's not a "defective" adapter. It is just that the manufacturer chose not to install the parts for some protocols, like yours. Any adapter you buy fr...

See this topic:

In theory it should work, but lately so many coming from China do not work for all cars that I would not take a chance on it. This one costs more but ...

It isn't just software lacking with the other (ABS, SRS, etc) modules. On many cars, those modules are on another bus entirely and could never be acce...

Response rates are almost entirely dependent on the PCM/ECM response rate, and that varies widely according to year and make. Older is generally slowe...

There was a bug in the latest release. It is fixed. Do an update now and it should be ok.

Buy an ELM327 adapter from BAFX. They are the cheapest ones guaranteed to work for all protocols. ELM327 Mini: BAFX (no missing parts):

Does your car's OBD2 connector have pin 15 installed? If it does, it requires an extra communication line than the other car. If there is no pin 15, t...

AT commands are only used to control the ELM chip, not to send commands to the vehicle computer. When you transmit a command preceded by "AT", the ELM...

Like Capp stated, mode 03 is only for the limited OBD2 mandated scope, actually modes 00 through 0f for Functional mode addressing. You would need to ...

You just beat me posting that link by a few minutes;-) OBD2 standard codes include many in the P07xx range, but the P1xxx codes are Honda propitiator...