Thanks for the feedback. My pushButton scripts were working the last time I used them a long time ago. I am also confused as to where the scrip...

Thanks for the response. I currently use an altitude display which must be set to a known elevation due to barometric changes daily. Having to e...

Within Torque, Test Results provides for viewing available mode 6 and O2 test data.

Search Wiki for OBD-II Pids. Information is there that should help. Interesting reading for me anyway.

Greetings Cintakc. It has been awhile for me but wouldn't that be a 7E1 and 7E7 for the mode 01 pid 20 request. ATSH may be useful in this cas...

Apparently the manual transmission does not have the sensor.

I believe Torque uses any publicly disclosed pids but some of the newer ones may use a pid without the correct data bytes and equation. This is w...

You might try testing the raw data response for the pid to see if any data is returned. (using the pid editor).

Maybe something like this thread.

Not sure what pid responses you are seeking. There was no data received from the test pid given.

Use Lookup in your equation. Also should be able to long press the display to access Torque's builtin alarm settings.

Tried "1092" this morning. Still no data but managed to set my ABS light ON. Trying to run TorqueScan to find other pids. It says "Waiting", ...

Doesn't seem to get a response. Wonder if a certain diagnostics start command is needed?

Thanks Cintakc for the quick response. Will give it a try and let you know.

Curious why the option below the automatic scan did not clear DTC but the clear fault pushbutton did.

isn't there an option under speech/alarm settings to do this?