Torque

Forums

Forums

Guest  

Show or hide header
Welcome Guest, posting in this forum require registration.




Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » Charge air temp for gti

Pages: [1]
Author Topic: Charge air temp for gti
DougzyPhresh
Member
Posts: 1
Post Charge air temp for gti
on: January 20, 2018 (GMT)

So I want to figure out how to implement the custom PIDs so that I can get a charge air temperature gauge. I would like to be able to compare intake temps and the charge air temps. For anyone that doesn’t know charge air is after the turbo and intercooler before it goes into the throttle.

GTP
Member
Posts: 2
Post Re: Charge air temp for gti
on: January 20, 2018 (GMT)

I’d like to know this also…

Capp777
Member
Posts: 2850
Post Re: Charge air temp for gti
on: January 21, 2018 (GMT)

I would build my own custom pid
using the OBD pid used by Torque (77).

While in the pid editor “Test” for the raw
hex response while at ambient temperature
KOEO. If a valid response with data is received
back you could then try to develop an equation
to match.

Pages: [1]
WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.1 seconds.

  Follow me on twitter