Torque

Forums

Forums

Guest  

Show or hide header
Welcome Guest, posting in this forum require registration.

Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » Trouble with costum PID's

Pages: 1 [2]
Author Topic: Trouble with costum PID's
cintakc
Member
Posts: 1661
Post Re: Trouble with costum PID
on: January 22, 2018 (GMT)

try to put a birdie in the profile “Use Alternate OBD Header”, then you will have both standard PIDs and the external PID you created
Stratos4C
Member
Posts: 16
Post Re: Trouble with costum PID
on: January 23, 2018 (GMT)

No difference :(
cintakc
Member
Posts: 1661
Post Re: Trouble with costum PID
on: January 24, 2018 (GMT)

this all needs to be done simultaneously
put a birdie in the profile “Use Alternate OBD Header”,
setting the initialization string in the profile
atsp7\natshda10f1
and set the preferred protocol in your profile
ISO 15765-4 (29/500)
Stratos4C
Member
Posts: 16
Post Re: Trouble with costum PID
on: January 24, 2018 (GMT)

There is some progress finally.

If I start Torque Pro with:
1) Don’t use Alternate settings
2) preferred OBD2 protocol: Automatic
3) No “very advanced ELM327 configuration string”
The standard PID are working correctly. However the costum PID gives “no data”.

However.
If I modify:
1) Use Alternate settings
2) Preferred OBD2 Protocol: Automatic (unchanged)
3) “atshda10f1” as very advanced ELM setting
All gauges are working correctly :)

But….
If I shut down Torque Pro and restart NON of the gauges are working anymore. I have to go back to step 1.

I looks like we are nearly there :)

I see there is a special option for the Preferred OBD2 Protocol “Alfa/Fiat (disabled, incomplete)”. Can that have something to do with my problems ?
Stratos4C
Member
Posts: 16
Post Re: Trouble with costum PID
on: January 25, 2018 (GMT)

The easiest way is to use only costum PID. For each standard PID there is a costum PID. For example engine temperture 0105 = 221003.
Now I can also read PID’s from TCT (dubble clutch) gearbox and ABS system :)

So basicly it finally turned out pretty well:)
Many thanks for all support.
Pages: 1 [2]
WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.019 seconds.

  Follow me on twitter