Forums

Guest
Welcome Guest, posting in this forum require registration. Username Password Remember me

Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » Do you support Iranian cars?

Pages: [1]

Author	Topic: Do you support Iranian cars?

hamed-pc

Member
Posts: 19

Do you support Iranian cars?
on: January 1, 2018 (GMT)

hi
good day

i’m living in ran

Do you support Iranian car? Fo example Iran khodro . included tondar 90 , Peugeot 405 , 206 , and pars

and saipa product included tiba , rana , pride , ?

cintakc

Member
Posts: 1661

Re: Do you support Iranian cars?
on: January 1, 2018 (GMT)

it all depends on the type of installed ECU, and you also need to apply external PIDs

piemmm

Administrator
Posts: 6629

Re: Do you support Iranian cars?
on: January 2, 2018 (GMT)

Hi!

It depends if the vehicle supports OBD2 (not just the correct shaped connector, but the ECU support as well) – I’m not sure on your countries commitment to OBD2, but you may be lucky and find that the manufacturer has enabled it (or had to enable it to comply with local regulations)

If it supports OBD2 then it should definitely work with Torque though!

hamed-pc

Member
Posts: 19

Re: Do you support Iranian cars?
on: January 6, 2018 (GMT)

hi
thank you for answer me
all of Cars made iran included obd2 Connector and i think all model use obd2 ECU support

i try test on same care from iran for example samand and pride and tel to you

i have question about External pid . how to use External pid and how to find ex pid for Each model of care ?

cintakc

Member
Posts: 1661

Re: Do you support Iranian cars?
on: January 7, 2018 (GMT)

try this program, it has support for Iranian cars
In the same place you can see the settings and PIDs
https://play.google.com/store/apps/details?id=hobdrive.android&hl=ru

hamed-pc

Member
Posts: 19

Re: Do you support Iranian cars?
on: January 19, 2018 (GMT)

Quote from hamed-pc on January 6, 2018
hi
thank you for answer me
all of Cars made iran included obd2 Connector and i think all model use obd2 ECU support

i try test on same care from iran for example samand and pride and tel to you

i have question about External pid . how to use External pid and how to find ex pid for Each model of care ?

Hi
good day
i check on my care ( Kia pride 20pin diagnosis connector and Siemens ECU 55 pin old model , SIEMENS K103735100 L ,
i try connect with torque to ecu . but not response . But connect with hi scan pro Cascade Desktop windows easy and work well .
….
i like to use torque work on my car . What will be done?
also i use ‘TorqueScan plugin and start scan . after many time responses 220601 , 228909 , 225679

Can use hi scan pro cascade software for sample signal and add to torque ? Do you understand my mean?
Excuse me for bad English

hamed-pc

Member
Posts: 19

Re: Do you support Iranian cars?
on: January 19, 2018 (GMT)

Quote from cintakc on January 7, 2018
try this program, it has support for Iranian cars
In the same place you can see the settings and PIDs
https://play.google.com/store/apps/details?id=hobdrive.android&hl=ru

Hi
thank you . Also use this software ( Hobdrive ) on my car But no response
this software A small amount of Iranian cars

hamed-pc

Member
Posts: 19

Re: Do you support Iranian cars?
on: January 24, 2018 (GMT)

Quote from admin on January 2, 2018
Hi!

If it supports OBD2 then it should definitely work with Torque though!

Hi Dear ian

Do you see my email ? i do send email to you . please check you’r email box

Thank’s

hamed-pc

Member
Posts: 19

Re: Do you support Iranian cars?
on: February 9, 2018 (GMT)

Hello Dear administrator

i do send many email to you . Do you See ?

i’m waiting for you’r answer

hamed-pc

Member
Posts: 19

Re: Do you support Iranian cars?
on: February 17, 2018 (GMT)

]

hi to all .
i very try connect to this ecu but not answer no response

please help me how to connect and how to config Init pid or hex on torque ?

i need all pid or hex to setting for response of this ecu

can i try hyper terminal for know witch protocol ?
so i need all init and pid or hex for test

hamed-pc

Member
Posts: 19

Re: Do you support Iranian cars?
on: February 25, 2018 (GMT)

Hi dear cintakc

please answer me . thank you
i Have Interface VAG 409.1

Can this work on torque?
if no . please send me with model of adapter compatible ?
do i use ELM327 Base Chip ? programmable chip set? For example STN1110 or ELM327 IC ?
. i need see chip for this model adapter becuse i want to make with myself . because i’m living in Iran . i have not this model adapter on store
thank you

cintakc

Member
Posts: 1661

Re: Do you support Iranian cars?
on: February 25, 2018 (GMT)

Interface VAG 409.1 will not work with the program Torque
I can not tell you which adapter will work with your car, which has a 20 pin diagnostic connector

hamed-pc

Member
Posts: 19

Re: Do you support Iranian cars?
on: February 25, 2018 (GMT)

Quote from cintakc on February 25, 2018
Interface VAG 409.1 will not work with the program Torque
I can not tell you which adapter will work with your car, which has a 20 pin diagnostic connector

ok . thank you . Dear cintakc

VAG 409.1 as well work on my care with original software

i try use other chispset upgradble firmware

Can Do add this model ECU and Car to work on torque ? for this way how to know and What needs to be done and how can i help you?

cintakc

Member
Posts: 1661

Re: Do you support Iranian cars?
on: February 25, 2018 (GMT)

VAG 409.1 as well work on my care with original software

with what software connects to your car through this adapter, make logs
there are monitoring programs for Com-Port, for example: portmon.exe, make a log monitoring of the com-port with this program, and give a link to the results, can maybe we will be able to see this protocol for your car

hamed-pc

Member
Posts: 19

Re: Do you support Iranian cars?
on: February 25, 2018 (GMT)

Quote from cintakc on February 25, 2018
VAG 409.1 as well work on my care with original software
with what software connects to your car through this adapter, make logs
there are monitoring programs for Com-Port, for example: portmon.exe, make a log monitoring of the com-port with this program, and give a link to the results, can maybe we will be able to see this protocol for your car

the original software name is hi scan pro

i try to use monitoring programs for Com-Port and make log and send to you . ok?

cintakc

Member
Posts: 1661

Re: Do you support Iranian cars?
on: February 25, 2018 (GMT)

hamed-pc

Member
Posts: 19

Re: Do you support Iranian cars?
on: February 25, 2018 (GMT)

Quote from cintakc on February 25, 2018
OK

Hi a gain . Can you tell me with software for using serial monitor work 1 port simultaneously ? softwar serial moon is good software But not work on my system