Torque

Forums

Forums

Guest  

Show or hide header
Welcome Guest, posting in this forum require registration.




Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » App does not automate in cycling connections...

Pages: [1]
Author Topic: App does not automate in cycling connections...
KentB59
Member
Posts: 1
Post App does not automate in cycling connections...
on: July 14, 2017 (GMT)

mobile= Samsung Galaxy S7 Edge (G935A), running Android 7.0 (Nougat).
Torque Pro, v.1.8.158
OBDII Connector = ScanTool ODBLink LX Bluetooth

Issue here is that you *can’t* leave Torque running on the mobile after you exit the car. If you leave the app on/running and you return to the car, it will not re-connect and will cause errors on the dashboard, with some idiot warning lights coming on.

You have to make an effort to exit the app and close it from RAM every time you finished driving. The app is not in “automatic” mode.

If you exit/close the app at the end of your drive and then turn it back on when you drive again, it works fine.

This is a serious hassle to do daily. Is there a solution to this?

Thank you.
~Kent

Pages: [1]
WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.026 seconds.

  Follow me on twitter