Torque

Forums

Forums

Guest  

Show or hide header
Welcome Guest, posting in this forum require registration.

Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » Nissan consult II protocal

Pages: [1]
Author Topic: Nissan consult II protocal
Mike02Ti
Member
Posts: 6
Post Nissan consult II protocal
on: July 4, 2016 (GMT)

Hi
I have seached this forum and not found any real answers
Does Torque Pro support Consult II as i can not get any data whatsoever from my vehicle.
Vehicle is a 2002 y61 (GU) Nissan Patrol with a TB48DE motor

Ecu identification is 1VC266
Protocal used to connect via other apps is ISO14230-4 (KWP fast)
My adapter is an ELM327 v1.5

From what i gather it uses a mix of OBDII and Consult II

Only thing i have found on this forum was dated 2013 and it was said it was going to be supported.
cintakc
Member
Posts: 1661
Post Re: Nissan consult II protocal
on: July 4, 2016 (GMT)

Your car has a 5-byte protocol requests, and Torque program is not yet able to issue requests for more than 4 bytes
The author promises in the next update is done
Mike02Ti
Member
Posts: 6
Post Re: Nissan consult II protocal
on: July 4, 2016 (GMT)

Thats good to hear. Looking forward to it.
If any beta testers are needed I will put my hand up for it.
Mike02Ti
Member
Posts: 6
Post Re: Nissan consult II protocal
on: October 4, 2016 (GMT)

Any updates on this??

Torque connects to my ECU but then nothing shows up at all.

I can receive data from other programs like Car Gauge Pro and NDSII (yes I know that last one is Nissan specific) for android but nothing for Torque.

I am running the latest version, I have tried the Nissan Plugin for torque which doesnt work at all for my issue.
piemmm
Administrator
Posts: 6629
Post Re: Nissan consult II protocal
on: October 4, 2016 (GMT)

Hi

For Consult II (not consult 1 or 3) I’ll need a protocol document to describe how it works (basically how to talk to the ECU using this protocol) – had a very quick search but couldn’t find any docs online (but as soon as I have the proper info I should be able to implement it relatively quickly)
cintakc
Member
Posts: 1661
Post Re: Nissan consult II protocal
on: October 4, 2016 (GMT)

Nissan Consult II — ISO 14230-4, with PID byte 5 specific requests
https://yadi.sk/i/yIE7qMS2wBha7
https://yadi.sk/i/V55sQ18VwBhfk
https://yadi.sk/d/mt_ssFwLwCECJ
Mike02Ti
Member
Posts: 6
Post Re: Nissan consult II protocal
on: October 4, 2016 (GMT)

I have just found something interseting in the technical service manual for my car.
Please note this is for a 2002 Nissan Patrol with a TB48DE motor
Under the comprehensive DTC List for Consult II for this it says “These numbers are prescribed by ISO 15031-5”
Not sure what that means to you guys.
If you want the DTC list I can send it if need be
I am running TorqueScan at the moment and can send through the data that collects once this completes if this helps too
Mike02Ti
Member
Posts: 6
Post Re: Nissan consult II protocal
on: October 4, 2016 (GMT)

Also found a wiki for Nissan specific commands

https://nissanecu.miraheze.org/wiki/C2_14230
piemmm
Administrator
Posts: 6629
Post Re: Nissan consult II protocal
on: October 4, 2016 (GMT)

Hi!

That’s actually quite helpful! – I can’t look at it at the moment (looking after the little ones) though I will have a nose through it tonight and see if I can make a start with what is there. If I can then great (though ultimately I’ll also need a list of sensors/scaling/units(etc) so I can provide them as well (I’ll see how I get on with the docs first though)
Mike02Ti
Member
Posts: 6
Post Re: Nissan consult II protocal
on: October 5, 2016 (GMT)

Hopefully this helps
Pages: [1]
WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.035 seconds.

  Follow me on twitter