Torque

Forums

Forums

Guest  

Show or hide header
Welcome Guest, posting in this forum require registration.

Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » problem with min/max index

Pages: [1]
Author Topic: problem with min/max index
406dany
Member
Posts: 11
Post problem with min/max index
on: March 4, 2016 (GMT)

Hi
I “thing” there is a little bug with the 2 index lowest value (yellow) and highest value (red) in the “dial meter”

the highest index is lock at the value max-min of gauge
this work well when min=0 but not if min > 0

for example i have boost pressure gauge from 800 to 2300mbar
and the max index stop at 1500mbar (=2300-800)
and also at this moment the min index is not show again

…

rgds

ps: i use the version 1.8.80 of torque pro
406dany
Member
Posts: 11
Post Re: problem with min/max index
on: April 3, 2016 (GMT)

hello
just a little UP of this bug with more details
this is a screenshot of 6 same battery voltage display from a custom pid with the formula : A/10
all display have a fixe max value:16
and the right column have min value at 0
and the left column have min value >0

you can see on upper left and lower left that the min/max index stay at the lower display (on half display)
(but no problem on full display)

rgds
piemmm
Administrator
Posts: 6629
Post Re: problem with min/max index
on: April 3, 2016 (GMT)

Hi!

They all look ok apart from the top left one – I’ll try to reproduce here and see if I can fix. (though I’m near a release update so it may get done in the next update after if it’s a bug)
Capp777
Member
Posts: 2993
Post Re: problem with min/max index
on: April 3, 2016 (GMT)

Looks like the bottom left has issues too
as the red max indicator is not where its
suppose to be. Assuming the yellow min
indicator is off view scale.
piemmm
Administrator
Posts: 6629
Post Re: problem with min/max index
on: April 3, 2016 (GMT)

Good point – I was fixated on the needle positions for some reason!
406dany
Member
Posts: 11
Post Re: problem with min/max index
on: April 4, 2016 (GMT)

Quote from admin on April 3, 2016
though I’m near a release update

eh eh … that is a good new !
thank for all your work
piemmm
Administrator
Posts: 6629
Post Re: problem with min/max index
on: April 4, 2016 (GMT)

Managed to reproduce – will see if I can get this fixed in the upcoming release
MrNielsen2000
Member
Posts: 36
Post Re: problem with min/max index
on: April 6, 2016 (GMT)

Similar issue: If I have a needle display type gauge for Engine RPM and set Minimum = 0, Maximum = 7000, the needle does not move above 0.

piemmm
Administrator
Posts: 6629
Post Re: problem with min/max index
on: August 3, 2016 (GMT)

Hi!

The display is scaled (it has x1000 on the display)

You want to set the maximum to 7, not 7000 (the display is x1000) and the needle will move. setting it to 7000 will cause it to move a tiny amount which won’t be visible (as the display scale is typically 0-7)

Pages: [1]
WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.036 seconds.

  Follow me on twitter