What exactly was the fix to be able to work around the HTC Desire problem?

Hi,

The Torque did close when you quit it – however there is a bug (that I think in the version about to be released might have fixed it) whereby the notification was left behind. Check the market in about an hour for a new version *hopefully* this will fix it for you.

Welllll not 100% perfect.

Yesterday driving home I started Torque to see the GPS Speedo. bluetooth OBD was not connected to the car.
Worked like it should be but this morning No connection with my carkit and a warm reset and not coming up like normal. Has to pull the battery…

GReeTZ Willem

Hi there guys, i also have a Desire here in the UK and can repot i have no issues? i have sent off my logs to the dev’s so they can have a look and see why mine is working?

I am using a ebay device from HK the data does look good but i will await a reply from the dev’s so i no its not producing bad data?

my desire is an debranded orange model running 2.1 update 1 and the bluetooth device was an ebay special supposably running firmware version 1.3?

the car is a UK spec EP3 type R….

if anyone wants help with settings give me a shout ill try and mirror your phone to mine….

Hi there EP3N3WP well i cant remember what engines the US SI’s have over here we have the K20 block but i do see what your saying… on the all widget data i do not get much in fact its a good few short of the bottom of the widget screen? from what i remember i get
accl
revs
speed
throttle
MPG
load
coolant
intake temp
and i think intake pressure

i think that is all? wether this is the honda ECU not giving much up? or the software isnt seeing everything?

as i said i have dropped my debug and data to the dev’s so hopefully they can provide a better answer?

what are you seeing?

also i have tried this on a 2000 JDM Subaru Legacy and it could not find the ECU? but it did work on a UK Colt CZT…

also is you green indicator light flashing slowly when connected? when i was in the colt the led flash alot fast?

hope that little lot helps….

Hi,

I’ve got a UK Vodafone HTC Desire on 2.2, also having issues with Torque (paid version). Using an ebay OBD2 adaptor, doesn’t appear to have any status LEDs or such like on it.

I can see and pair with the adaptor (says “Paired but not connected” but I understand that’s fine?) and Torque seems to find the adaptor and under “Adapter Status” from the opening screen it shows “Connection to Adapter” as “Yes” but “Connection to ECU” always says No. Occasionally if on the opening screen I get “No response from OBD adapter” and am advised to check it or restart the phone. There’s nothign to check really (it is plugged in) and I’ve restarted the phone.

I’ve tried setting “faster communication” and “disable ELM327 auto timing” to on in the settings and even tried the “alternate OBD header” setting under the car profile bit. Still no joy.

The car in question is a 55-plate UK-spec Seat Leon Cupra R so that’s the Golf Mk4 platform, I believe the ECU is an ME7.

Hope someone can help!

Hi!

I’ve bought the Torque Pro and installed on an HTC Desire (bravo). The app works fine, but when I quit from it the phone totaly hangs up.
I can only remove and reinsert the battery to reset/restart the phone.
I’ve read your note what is saying the issues about HTC/Samsung phones, and I wrote to HTC support, but they said this is a 3rd party product and the developer should solve this problem. I attached your note to my mail, and tried to explain that is not the app’s problem but the bluetooth driver’s in their device.

How can we solve this hanging problem, because it’s really annoying to remove the battery after every app. usage.

Could you please get contact with HTC and explain what is the problem with the device’s bluetooth driver?

Thanks in advance,
Nazza