Torque

Forums

Forums

Guest  

Show or hide header
Welcome Guest, posting in this forum require registration.

Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » Nissan Murano- No response from ECU

Pages: 1 [2]
Author Topic: Nissan Murano- No response from ECU
shudman
Member
Posts: 4
Post Re: Nissan Murano- No response from ECU
on: March 25, 2015 (GMT)

yeah well, ironically I have an S5 too. Holding the “old” menu button down does take me to that screen…but I just see “Add custom PID”…but how does that help me set proto to manual ?
I am surely missing something here :(
cintakc
Member
Posts: 1661
Post Re: Nissan Murano- No response from ECU
on: March 25, 2015 (GMT)

Quote from Espe on March 21, 2015
All right… now I got connection to ECU. But no data. And connection to ECU stop working after about 1-2 minutes.
Adapter version is 2.1

you write has a connection to the ECU
Put screens
Espe
Member
Posts: 15
Post Re: Nissan Murano- No response from ECU
on: March 25, 2015 (GMT)

This Finnish… :-)

Here you see car-icon so we have conncetion to adapter:

Here’s ADAPTER STATUS. “Yhteys moottoriyksikköön” = Connection to ECU. And that’s OK.

Here’s TEST RESULTS.

CAR PROFILE.
“Käytä vaihtoehtoista…” = Use alternative OBD-protocol
cintakc
Member
Posts: 1661
Post Re: Nissan Murano- No response from ECU
on: March 25, 2015 (GMT)

on the last screenshot, remove the green bird
when you put it, it is switching to the use of external lipids, and you are not using them
Espe
Member
Posts: 15
Post Re: Nissan Murano- No response from ECU
on: March 26, 2015 (GMT)

Green bird removed.

FIRST TIME after connecting to adapter:
– car-icon OK
– Connection to ECU OK
– adapter starts to count “other faults”. Now over 20!
– after that it loses connection to ECU
– trying to make it back, but no success

Only way to get connection back is start all again. Turn car key off and shut Torgue. After that same thing: First get connection and then lose it.

When connection to ECU is OK and I go to check TEST RESULTS, there’s that same “ECU does not appear to support Mode S06”
cintakc
Member
Posts: 1661
Post Re: Nissan Murano- No response from ECU
on: March 26, 2015 (GMT)

you enter the “Realtime Information”
and look at the devices
on this tab, long tap on the screen to create new appliance, choose from the list that are highlighted green color
make screenshot
Espe
Member
Posts: 15
Post Re: Nissan Murano- No response from ECU
on: March 28, 2015 (GMT)

Long tap on Realtime Info:

“Lisää näyttö” (create new appliance).
There’s nothing (text) highlighted green color:

But there was some icons with green color and I choose this “Current Drive Cycle Status”:

“Moottoriyksikkö ei tue tätä toimintoa” = ECU doesn’t support this function (or something like that.. :-) )
cintakc
Member
Posts: 1661
Post Re: Nissan Murano- No response from ECU
on: March 28, 2015 (GMT)

Take a screenshot of where offers a list of parameters and if there is a green
Espe
Member
Posts: 15
Post Re: Nissan Murano- No response from ECU
on: March 28, 2015 (GMT)

Tell again where exactly those parameters are.
cintakc
Member
Posts: 1661
Post Re: Nissan Murano- No response from ECU
on: March 28, 2015 (GMT)

you enter the “Realtime Information”
and look at the devices
on this tab, long tap on the screen to create new appliance, choose from the list that are highlighted green color
Espe
Member
Posts: 15
Post Re: Nissan Murano- No response from ECU
on: March 29, 2015 (GMT)

Do you mean these highlighted green color??




cintakc
Member
Posts: 1661
Post Re: Nissan Murano- No response from ECU
on: March 29, 2015 (GMT)

if others parameters such as vehicle speed, engine speed of the car is not illuminated in green, then your adapter version 2.1 will not work
you need an adapter version 1.5
Espe
Member
Posts: 15
Post Re: Nissan Murano- No response from ECU
on: April 2, 2015 (GMT)

OK. Thanks for helping…
Pages: 1 [2]
WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.044 seconds.

  Follow me on twitter