Torque

Forums

Forums

Guest  

Show or hide header
Welcome Guest, posting in this forum require registration.

Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » Vauxhall (Opel GM) DPF PID

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [18] 19 20
Author Topic: Vauxhall (Opel GM) DPF PID
Signumator
Member
Posts: 2
Post Re: Vauxhall (Opel GM) DPF PID
on: February 7, 2019 (GMT)

Hello,

i am reading in this thread for a long time, but now i also have a specific question:

I have Opel Signum 1.9 CDTI (Z19DTH) from 2008 and i use the PID´s from the first four pages in this thread for DPF Saturation, km since last Re-Gen and Re-Gen Status.

I use a OBDLink LX Adapter.

They work perfekt with Torque and my Android Head-Unit.

My Question ist: has anyone the correct PID for DPF Temperature und Difference-Pressure for my Engine?

Thanks for your help!

Signumator
srhtctnr
Member
Posts: 6
Post Re: Vauxhall (Opel GM) DPF PID
on: February 8, 2019 (GMT)

Hello to everyone ..
How to add indicators that we can follow ALL dpf regeneration operations via Torque program
We ask for help from our friends and managers who are familiar with the information. And, if possible, we ask them to share information on how to do this if a different operation is performed for each engine. We thank you in advance for your interest and support.
cintakc
Member
Posts: 1663
Post Re: Vauxhall (Opel GM) DPF PID
on: February 9, 2019 (GMT)

Signumator
Opel Signum 1.9 CDTI (Z19DTH) from 2008

"Name","ShortName","ModeAndPID","Equation","Min Value","Max Value","Units","Header","Diagnostic start command","Diagnostic stop command"
"Opel Signum DPF Differential Pressure","Diff. press.","aa0117","b*99/255","0","100","kPa","7E0","atcra5e8\natd1\nath1","atcra7e8\natd0\nath0"
"Opel Signum Exhaust gas temp. sensor curcuit B1S1","Temp. B1S1","aa0117","e*4-40","-40","980","grad C","7E0","atcra5e8\natd1\nath1","atcra7e8\natd0\nath0"
"Opel Signum Exhaust gas temp. sensor curcuit B1S2","Temp. B1S2","aa0117","g*4-40","-40","980","grad C","7E0","atcra5e8\natd1\nath1","atcra7e8\natd0\nath0"
Signumator
Member
Posts: 2
Post Re: Vauxhall (Opel GM) DPF PID
on: February 9, 2019 (GMT)

Hi cintakc,

thank you very much for the pid´s.
I have added them to my custom pid and they work properly.

The only difference i had to do was to add the start/stop commands:

Start config: atcra5e8\natd1\nath1
Stop config: atcra7e8\natd0\nath0

With header 7E0 i got no response.

If you have more information about specific pid for the z19dth engine (Oil pressure, Oil live etc.. ) please post them also here or send a pm to me, i would highly appreciate that.

Again: thank you very much for your help, a long long search ended today caused by your help!

Signumator
cintakc
Member
Posts: 1663
Post Re: Vauxhall (Opel GM) DPF PID
on: February 9, 2019 (GMT)

The only difference i had to do was to add the start/stop commands:
Start config: atcra5e8\natd1\nath1
Stop config: atcra7e8\natd0\nath0
naturally, I think you know about it, since you wrote that you have something working, so I did not write about it

"Name","ShortName","ModeAndPID","Equation","Min Value","Max Value","Units","Header","Diagnostic start command","Diagnostic stop command"
"Opel Signum Remaining Oil Time","RemOilTime","aa0103","f/2","0","127","%","7E0","atcra5e8\natd1\nath1","atcra7e8\natd0\nath0"
pepe273
Member
Posts: 1
Post Re: Vauxhall (Opel GM) DPF PID
on: February 12, 2019 (GMT)

Hi cintakc,

I’ve tried some of the PIDs for my A17DTC. Those Astra-K PIDs seem to work fine, but I am missing the PID for DPF Soot Accumulation. Also the engine oil life PID does not seem to read the same as the indicator in the car dashobard.

Do you have any other PIDs I could try to test?

I have the OBDLink MX Adapter.
Cheers,
Peter
vis-sol
Member
Posts: 1
Post Re: Vauxhall (Opel GM) DPF PID
on: February 12, 2019 (GMT)

Hi guys.
Has anybody got the full DPF PID details for the insignia B20DTH?
Also the oil preasure PID details for the same engine.
Thanks very much in advance
akhelmet
Member
Posts: 4
Post Re: Vauxhall (Opel GM) DPF PID
on: June 16, 2019 (GMT)

Quote from cintakc on February 1, 2019
give answers
atz
atsp6
atsh7e0
20
223039

Hi cintakc

My car is 2013 corsa d – 1.3 start & stop A13DTE.
I want to enable all dpf features and add their indicators on the torque screen. I would like dpf pid formulas for my car.

I try Astra J A13DTE pids but not work

here terminal results

> atz
?
>> atsp6
OK
>> atsh7e0
?
>>20
7E8037F2022

>>223039
7E8037F2222
cintakc
Member
Posts: 1663
Post Re: Vauxhall (Opel GM) DPF PID
on: June 16, 2019 (GMT)

check the adapter with this program
https://play.google.com/store/apps/details?id=com.applagapp.elm327identifier&hl=ru
akhelmet
Member
Posts: 4
Post Re: Vauxhall (Opel GM) DPF PID
on: June 17, 2019 (GMT)

Quote from cintakc on June 16, 2019
check the adapter with this program
https://play.google.com/store/apps/details?id=com.applagapp.elm327identifier&hl=ru

here

{noformat}
Scan date=2019-06-17 12:41:38
Device name=OBDII
Device mac=A2:2A:19:04:00:00
Device Version (Declared)=ELM327 v1.5

Command Version Result
AT@1 1.0 OK
ATSPA6 1.0 KO
ATTPA6 1.0 KO
ATTP6 1.0 OK
ATSP00 1.3 KO
ATSP6 1.0 OK
ATAL 1.0 KO
ATNL 1.0 KO
ATAMC 2.0 KO
ATAMT20 2.0 KO
ATRA70 1.3 KO
ATSR70 1.2 KO
ATAR 1.2 KO
ATAT0 1.2 OK
ATAT2 1.2 KO
ATAT1 1.2 OK
ATBD 1.0 KO
ATBRT0F 1.2 KO
ATCAF0 1.0 OK
ATCAF1 1.0 OK
ATCEA04 1.4 KO
ATCERF1 2.2 KO
ATCEA 1.4 KO
ATCF00000111 1.0 KO
ATCF111 1.0 KO
ATCFC0 1.0 OK
ATCFC1 1.0 OK
ATCM00000111 1.0 KO
ATCM111 1.0 KO
ATCP18 1.0 KO
ATCRA7C0 1.3 KO
ATCRA000007C0 1.3 KO
ATCRA 1.4b KO
ATCS 1.0 KO
ATCSM0 1.4b OK
ATCSM1 1.4b OK
ATCTM5 2.1 KO
ATCTM1 2.1 KO
ATCV0000 1.4 KO
ATD1 1.3 OK
ATD0 1.3 OK
ATDP 1.0 OK
ATDPN 1.0 OK
ATE0 1.0 OK
ATE1 1.0 OK
ATFCSD0430FF00 1.1 KO
ATFCSH000007B0 1.1 KO
ATFCSH7B0 1.1 KO
ATFCSM0 1.1 KO
ATFE 1.3a KO
ATH0 1.0 OK
ATH1 1.0 OK
ATI 1.0 OK
ATIB10 1.0 KO
ATIB12 2.2 KO
ATIB15 2.2 KO
ATIB48 1.4 KO
ATIB96 1.0 KO
ATIFRS 1.2 KO
ATIFRH 1.2 KO
ATIFR0 1.2 KO
ATIFR2 1.2 KO
ATIFR1 1.2 KO
ATIFR6 2.2 KO
ATIFR5 2.2 KO
ATIFR4 2.2 KO
ATIGN 1.4 KO
ATIIA7A 1.2 KO
ATJS 1.3 KO
ATJE 1.3 KO
ATJHF0 1.4b OK
ATJHF1 1.4b OK
ATJTM5 1.4b KO
ATJTM1 1.4b KO
ATKW 1.3 KO
ATKW0 1.2 OK
ATKW1 1.2 OK
ATL0 1.0 OK
ATL1 1.0 OK
ATM1 1.0 OK
ATM0 1.0 OK
ATPPFFON 1.1 KO
ATPPFFOFF 1.1 KO
ATR0 1.0 OK
ATR1 1.0 OK
ATRV 1.0 OK
ATS0 1.3 OK
ATS1 1.3 OK
ATSDFF 1.4 KO
ATRD 1.4 KO
ATSH000007E0 2.0 KO
ATSHA848F1 1.0 KO
ATSH7B0 1.0 KO
ATST32 1.0 KO
ATSWFF 1.0 KO
ATTAF9 1.4 KO
ATV1 1.3 OK
ATV0 1.3 OK
ATWMC133F13E 1.0 KO
ATPC 1.0 OK
ATWS 1.0 OK
ATD 1.0 OK
ATZ 1.0 OK

{noformat}
cintakc
Member
Posts: 1663
Post Re: Vauxhall (Opel GM) DPF PID
on: June 17, 2019 (GMT)

you have an adapter with fake firmware
akhelmet
Member
Posts: 4
Post Re: Vauxhall (Opel GM) DPF PID
on: June 17, 2019 (GMT)

Quote from cintakc on June 17, 2019
you have an adapter with fake firmware

Is there any chance of correcting?
cintakc
Member
Posts: 1663
Post Re: Vauxhall (Opel GM) DPF PID
on: June 17, 2019 (GMT)

need to buy another
akhelmet
Member
Posts: 4
Post Re: Vauxhall (Opel GM) DPF PID
on: June 17, 2019 (GMT)

Quote from cintakc on June 17, 2019
need to buy another

got it, thanks for your help
molnar252
Member
Posts: 1
Post Re: Vauxhall (Opel GM) DPF PID
on: June 18, 2019 (GMT)

Hello, I have Opel Astra J A17DTC, I want please PID code about DPF (etc. temperature DPF, Differential Pressure, Distance last since last regeneration DPF, Regeneration status,….)

Thank you.
qs
Member
Posts: 2
Post Re: Vauxhall (Opel GM) DPF PID
on: June 19, 2019 (GMT)

Hello,

Does anyone have working set of instructions for Vectra C 2008 1.9 CDTI (Z19DT) 120HP?

I tried many combinations from this thread, but those are mostly for Astra and various engines.

Are Signums similar enough to Vectra to adapt PIDs? (few posts above?)

I’m interested in DPF saturation/state, DPF regeneration progress (so i know not to stop my engine while regen is running) and eventually KM since last regeneration (so i know when to expect next one)…

Any other useful PIDs would also be welcome.

I’m willing to do any diagnostics necessary on my car/adapter to make this work.
haritos14
Member
Posts: 2
Post Re: Vauxhall (Opel GM) DPF PID
on: June 21, 2019 (GMT)

Hello guys,please Do you have PID for Opel Insignia 1.6 turbo???more interested me temp oil and catalyst temp
Kamilst
Member
Posts: 1
Post Re: Vauxhall (Opel GM) DPF PID
on: September 22, 2019 (GMT)

I am newbie and I cant find an information about PID for my Astra J from 2014. I would like to have 3 additional information on my dashboard. 1. Distance from last DPF regeneration. 2. DPF temperature to know at what temperature DPF is burning. And last one 3. % of current fill. Can any of you help me with this please?
isidro
Member
Posts: 1
Post Re: Vauxhall (Opel GM) DPF PID
on: September 25, 2019 (GMT)

How can I find out the DPF PID of the Chevrolet Cruze 2.0 VCDi 163 CV (2013-2016)
Thank you
diostraous
Member
Posts: 2
Post Re: Vauxhall (Opel GM) DPF PID
on: November 21, 2019 (GMT)

hello , I need PID for DPF
my car : opel corsa d 2011 1.3 diesel with start/stop engine: A13DTE

I use torque pro with bluetooth adapter and ELM identifier said:

Scan date=2019-11-19 11:41:43
Device name=OBDII
Device mac=00:00:00:33:33:33
Device Version (Declared)=ELM327 v2.1

Command Version Result
AT@1 1.0 OK
ATSPA6 1.0 OK
ATTPA6 1.0 OK
ATTP6 1.0 OK
ATSP00 1.3 OK
ATSP6 1.0 OK
ATAL 1.0 OK
ATNL 1.0 OK
ATAMC 2.0 KO
ATAMT20 2.0 KO
ATRA70 1.3 OK
ATSR70 1.2 OK
ATAR 1.2 OK
ATAT0 1.2 OK
ATAT2 1.2 OK
ATAT1 1.2 OK
ATBD 1.0 OK
ATBRT0F 1.2 OK
ATCAF0 1.0 OK
ATCAF1 1.0 OK
ATCEA04 1.4 OK
ATCERF1 2.2 KO
ATCEA 1.4 OK
ATCF00000111 1.0 OK
ATCF111 1.0 OK
ATCFC0 1.0 OK
ATCFC1 1.0 OK
ATCM00000111 1.0 OK
ATCM111 1.0 OK
ATCP18 1.0 OK
ATCRA7C0 1.3 OK
ATCRA000007C0 1.3 OK
ATCRA 1.4b OK
ATCS 1.0 OK
ATCSM0 1.4b OK
ATCSM1 1.4b OK
ATCTM5 2.1 KO
ATCTM1 2.1 KO
ATCV0000 1.4 OK
ATD1 1.3 OK
ATD0 1.3 OK
ATDP 1.0 OK
ATDPN 1.0 OK
ATE0 1.0 OK
ATE1 1.0 OK
ATFCSD0430FF00 1.1 OK
ATFCSH000007B0 1.1 OK
ATFCSH7B0 1.1 OK
ATFCSM0 1.1 OK
ATFE 1.3a OK
ATH0 1.0 OK
ATH1 1.0 OK
ATI 1.0 OK
ATIB10 1.0 OK
ATIB12 2.2 KO
ATIB15 2.2 KO
ATIB48 1.4 OK
ATIB96 1.0 OK
ATIFRS 1.2 OK
ATIFRH 1.2 OK
ATIFR0 1.2 OK
ATIFR2 1.2 OK
ATIFR1 1.2 OK
ATIFR6 2.2 KO
ATIFR5 2.2 KO
ATIFR4 2.2 KO
ATIGN 1.4 KO
ATIIA7A 1.2 OK
ATJS 1.3 OK
ATJE 1.3 OK
ATJHF0 1.4b OK
ATJHF1 1.4b OK
ATJTM5 1.4b OK
ATJTM1 1.4b OK
ATKW 1.3 OK
ATKW0 1.2 OK
ATKW1 1.2 OK
ATL0 1.0 OK
ATL1 1.0 OK
ATM1 1.0 OK
ATM0 1.0 OK
ATPPFFON 1.1 OK
ATPPFFOFF 1.1 OK
ATR0 1.0 OK
ATR1 1.0 OK
ATRV 1.0 OK
ATS0 1.3 OK
ATS1 1.3 OK
ATSDFF 1.4 OK
ATRD 1.4 OK
ATSH000007E0 2.0 KO
ATSHA848F1 1.0 OK
ATSH7B0 1.0 OK
ATST32 1.0 OK
ATSWFF 1.0 OK
ATTAF9 1.4 OK
ATV1 1.3 OK
ATV0 1.3 OK
ATWMC133F13E 1.0 OK
ATPC 1.0 OK
ATWS 1.0 OK
ATD 1.0 OK
ATZ 1.0 OK

I tried many PIDs from this forum, but nothing
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [18] 19 20
WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.166 seconds.

  Follow me on twitter