Forums

Guest
Welcome Guest, posting in this forum require registration. Username Password Remember me

Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » Vauxhall (Opel GM) DPF PID

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 [13] 14 15 16 17 18 19 20

Author	Topic: Vauxhall (Opel GM) DPF PID

Ashaman

Member
Posts: 16

Re: Vauxhall (Opel GM) DPF PID
on: May 22, 2018 (GMT)

Quote from cintakc on May 14, 2018
PID is supported on your car, write the change log of this PID
if you use the formula 1-{A:0}, then according to the value you specify, it should show “ON”
if you use the formula {A:0}, then according to the value you specify, it should show “OFF”

Hey cintakc.
Car did a regen yesterday and during the whole time the Regen Status was at Off which means it does not work on my car. It’s ok though since I can see when a regeneration is done from the other PIDs .
Thnx mate once more 😉

cintakc

Member
Posts: 1661

Re: Vauxhall (Opel GM) DPF PID
on: May 22, 2018 (GMT)

ltmpx

Member
Posts: 18

Re: Vauxhall (Opel GM) DPF PID
on: May 22, 2018 (GMT)

Quote from cintakc on May 22, 2018
I looked, you are connected to the ECS using a standard protocol,
To connect to the factory protocol, you need to configure the auto profile, where to register the initialization string
atsp6\nath1\natsh7e0\natcra5e8

try in the terminal ElmBasic send commands as in the screenshot, what you get the answer
https://yadi.sk/i/Fb8qYwfy3WLKFU

https://yadi.sk/i/WPXxXwHz3WLL29

Hello Sir,

I did what you said, and after setting the string in auto profile, then none of the sensors worked; and still no data message on aa0329.

I have uploaded screenshots at https://drive.google.com/drive/folders/1IughoOtUEK0SWvw6dcZZYQh1UQybJ6TW?usp=sharing

cintakc

Member
Posts: 1661

Re: Vauxhall (Opel GM) DPF PID
on: May 22, 2018 (GMT)

try in the terminal ElmBasic send commands as in the screenshot, what you get the answer
https://yadi.sk/i/Fb8qYwfy3WLKFU

check your adapter with the program
https://play.google.com/store/apps/details?id=com.applagapp.elm327identifier&hl=ru

maybe your adapter does not understand some commands, in particular the command ath1

ltmpx

Member
Posts: 18

Re: Vauxhall (Opel GM) DPF PID
on: May 22, 2018 (GMT)

Quote from cintakc on May 22, 2018
try in the terminal ElmBasic send commands as in the screenshot, what you get the answer
https://yadi.sk/i/Fb8qYwfy3WLKFU

check your adapter with the program
https://play.google.com/store/apps/details?id=com.applagapp.elm327identifier&hl=ru

maybe your adapter does not understand some commands, in particular the command ath1

OK, Sir, I will do it with ElmBasic, and report back.

Thank you!

ltmpx

Member
Posts: 18

Re: Vauxhall (Opel GM) DPF PID
on: May 22, 2018 (GMT)

Quote from ltmpx on May 22, 2018
Quote from cintakc on May 22, 2018
try in the terminal ElmBasic send commands as in the screenshot, what you get the answer
https://yadi.sk/i/Fb8qYwfy3WLKFU

check your adapter with the program
https://play.google.com/store/apps/details?id=com.applagapp.elm327identifier&hl=ru

maybe your adapter does not understand some commands, in particular the command ath1

OK, Sir, I will do it with ElmBasic, and report back.

Thank you!

Hello,

So this is what elm327 identifier said:

Scan date=2018-05-22 15:51:49
Device name=OBDII
Device mac=00:1D:A5:01:15:9C
Device Version (Declared)=ELM327 v1.5

Command Version Result
AT@1 1.0 OK
ATSPA6 1.0 OK
ATTPA6 1.0 OK
ATTP6 1.0 OK
ATSP00 1.3 OK
ATSP6 1.0 OK
ATAL 1.0 OK
ATNL 1.0 OK
ATAMC 2.0 KO
ATAMT20 2.0 KO
ATRA70 1.3 OK
ATSR70 1.2 OK
ATAR 1.2 OK
ATAT0 1.2 OK
ATAT2 1.2 OK
ATAT1 1.2 OK
ATBD 1.0 OK
ATBRT0F 1.2 OK
ATCAF0 1.0 OK
ATCAF1 1.0 OK
ATCEA04 1.4 OK
ATCERF1 2.2 KO
ATCEA 1.4 OK
ATCF00000111 1.0 OK
ATCF111 1.0 OK
ATCFC0 1.0 OK
ATCFC1 1.0 OK
ATCM00000111 1.0 OK
ATCM111 1.0 OK
ATCP18 1.0 OK
ATCRA7C0 1.3 OK
ATCRA000007C0 1.3 OK
ATCRA 1.4b KO
ATCS 1.0 OK
ATCSM0 1.4b KO
ATCSM1 1.4b KO
ATCTM5 2.1 KO
ATCTM1 2.1 KO
ATCV0000 1.4 OK
ATD1 1.3 OK
ATD0 1.3 OK
ATDP 1.0 OK
ATDPN 1.0 OK
ATE0 1.0 OK
ATE1 1.0 OK
ATFCSD0430FF00 1.1 OK
ATFCSH000007B0 1.1 OK
ATFCSH7B0 1.1 OK
ATFCSM0 1.1 OK
ATFE 1.3a OK
ATH0 1.0 OK
ATH1 1.0 OK
ATI 1.0 OK
ATIB10 1.0 OK
ATIB12 2.2 KO
ATIB15 2.2 KO
ATIB48 1.4 OK
ATIB96 1.0 OK
ATIFRS 1.2 OK
ATIFRH 1.2 OK
ATIFR0 1.2 OK
ATIFR2 1.2 OK
ATIFR1 1.2 OK
ATIFR6 2.2 KO
ATIFR5 2.2 KO
ATIFR4 2.2 KO
ATIGN 1.4 OK
ATIIA7A 1.2 OK
ATJS 1.3 OK
ATJE 1.3 OK
ATJHF0 1.4b KO
ATJHF1 1.4b KO
ATJTM5 1.4b KO
ATJTM1 1.4b KO
ATKW 1.3 OK
ATKW0 1.2 OK
ATKW1 1.2 OK
ATL0 1.0 OK
ATL1 1.0 OK
ATM1 1.0 OK
ATM0 1.0 OK
ATPPFFON 1.1 OK
ATPPFFOFF 1.1 OK
ATR0 1.0 OK
ATR1 1.0 OK
ATRV 1.0 OK
ATS0 1.3 OK
ATS1 1.3 OK
ATSDFF 1.4 OK
ATRD 1.4 OK
ATSH000007E0 2.0 KO
ATSHA848F1 1.0 OK
ATSH7B0 1.0 OK
ATST32 1.0 OK
ATSWFF 1.0 OK
ATTAF9 1.4 OK
ATV1 1.3 OK
ATV0 1.3 OK
ATWMC133F13E 1.0 OK
ATPC 1.0 OK
ATWS 1.0 OK
ATD 1.0 OK
ATZ 1.0 OK

In elmbasic:

atsp6
OK

>atsh7e0
OK

>atcra5e8
OK

>20
NO DATA

>aa0329
5E8 29 58 14 05 00 3A 00 00

It is this ok?

cintakc

Member
Posts: 1661

Re: Vauxhall (Opel GM) DPF PID
on: May 22, 2018 (GMT)

Yes, now it is clear that the adapter is working correctly and understands the commands you need, then the case in the settings of Torque

try the initialization string
atsp6\natsh7e0\n20

and https://yadi.sk/i/O39UZ69J3WMx3e

ltmpx

Member
Posts: 18

Re: Vauxhall (Opel GM) DPF PID
on: May 22, 2018 (GMT)

I am going to car, and do it. I will replay asap.
Rgds!

ltmpx

Member
Posts: 18

Re: Vauxhall (Opel GM) DPF PID
on: May 22, 2018 (GMT)

Quote from cintakc on May 22, 2018
Yes, now it is clear that the adapter is working correctly and understands the commands you need, then the case in the settings of Torque

try the initialization string
atsp6\natsh7e0\n20

and https://yadi.sk/i/O39UZ69J3WMx3e

Sir,

Please take a look at this scheenshot (last one in the folder) from this link

https://drive.google.com/drive/folders/1IughoOtUEK0SWvw6dcZZYQh1UQybJ6TW?usp=sharing

as there are a lot of lines wih replays…

cintakc

Member
Posts: 1661

Re: Vauxhall (Opel GM) DPF PID
on: May 22, 2018 (GMT)

yes it works

ltmpx

Member
Posts: 18

Re: Vauxhall (Opel GM) DPF PID
on: May 22, 2018 (GMT)

So, I should try to use your formulas from a few posts ago,
Regenerations Sincle DPF Exchange (DPF)
aa0329 D*256+E – 00h*256+3Ah=58

Load state particle filter
aa0329 A*200/255 % 62h*200/255=76.8 %

Particle filter differential pressure
aa0329 C-5 kPa 05h-5=0 kPa

Particle filter differential pressure sensor (volt)
aa0329 B*5/255 V 14h*5/255=0.37 v

with the initialization string and header, start, stop command?

cintakc

Member
Posts: 1661

Re: Vauxhall (Opel GM) DPF PID
on: May 22, 2018 (GMT)

try this
https://yadi.sk/i/tSBQYLx63WN4UL
https://yadi.sk/i/nLegMPJu3WN4iq

ltmpx

Member
Posts: 18

Re: Vauxhall (Opel GM) DPF PID
on: May 22, 2018 (GMT)

Quote from cintakc on May 22, 2018
try this
https://yadi.sk/i/tSBQYLx63WN4UL
https://yadi.sk/i/nLegMPJu3WN4iq

So, for the first with
aa0329, b*5/255, header 7e0, start string atcra5e8\nath1\natd1
end string atcra7e8\nath0\natd0
I get
Result for equation: 0.39215687
Start Diagnostic Response:
OK
OK
OK
Command:
aa0329
Response:
5E8829581405003A0000 (17 times this row)
Variables used in equation:
B=20 (hex=14, binary=00010100)
Equation steps
=Bx5/255

and entering the raw command
atcra5e8
aa0329

I get
Response(s) for command: aa0329
9:581405003A0000- 17 times the same row

It is this ok?

cintakc

Member
Posts: 1661

Re: Vauxhall (Opel GM) DPF PID
on: May 22, 2018 (GMT)

Yes, everything is fine, now try to create devices and monitor their readings

ltmpx

Member
Posts: 18

Re: Vauxhall (Opel GM) DPF PID
on: May 22, 2018 (GMT)

Cintakc,

I have create custom pids with the formulas from you, and I finaly have them!
I am so happy! Too bad we are so far away, because I will gladly buy you a 6 pack of beers!

I have the dpf regeneration numbers, loading %, and differential pressure working.

Thank you so much for your time, for your patience!

cintakc

Member
Posts: 1661

Re: Vauxhall (Opel GM) DPF PID
on: May 23, 2018 (GMT)

ltmpx

Distance sincle the last DPF replacement
aa032a		A*65536+B*256+C			km
Distance travelled sincle last regeneration
aa032a		D*65536+E*256+F			km
Particle filter regeneration
aa032a		G*100/255			%

ltmpx

Member
Posts: 18

Re: Vauxhall (Opel GM) DPF PID
on: May 23, 2018 (GMT)

Quote from cintakc on May 23, 2018
ltmpx

Distance sincle the last DPF replacement
aa032a		A*65536+B*256+C			km
Distance travelled sincle last regeneration
aa032a		D*65536+E*256+F			km
Particle filter regeneration
aa032a		G*100/255			%

I did try the formulas from you with aa0329 and had results; the only down side is that after a wile the pids are blocked, and have to restart them, but it is ok, because, when I need info I can access them.

I will try the above formulas and then report back!

Thank you Sir!

ltmpx

Member
Posts: 18

Re: Vauxhall (Opel GM) DPF PID
on: May 27, 2018 (GMT)

Quote from ltmpx on May 23, 2018
Quote from cintakc on May 23, 2018
ltmpx

Distance sincle the last DPF replacement
aa032a		A*65536+B*256+C			km
Distance travelled sincle last regeneration
aa032a		D*65536+E*256+F			km
Particle filter regeneration
aa032a		G*100/255			%

I will try the above formulas and then report back!

Thank you Sir!

I am happy to report that all the pids are working and I can see a complete picture of the dpf filter!

Cintack, you are the best!

gra

Member
Posts: 17

Re: Vauxhall (Opel GM) DPF PID
on: June 14, 2018 (GMT)

Yes, cintack is the best!
Try to reverse filters in that start/stop commands:
atcra5e8\n atd1 \n ath1…
Even so, i get slow response from pids. in some cases refresh rate is about 8 seconds…and when using other pids like egr or instant fuel rate, this rate is…not nice

joellsvk

Member
Posts: 2

Re: Vauxhall (Opel GM) DPF PID
on: July 26, 2018 (GMT)

Hello people, I have Opel Vectra C 1.9CDTi (Z19DTH) 2006 and none of mentioned PIDs worked for me but I did full PIDs Scan and this is the result:

TorqueScan scanning has started. Discovered PIDs will appear here.
Command: 2120 response:612026002F03 
Command: 2126 response:612500 
Command: 212c response:612C2C66E4 
Command: 212d response:612D03C870 
Command: 212e response:612EC0FB 
Command: 2140 response:61407878 
Command: 2141 response:61417878 
Command: 2142 response:61427878 
Command: 2143 response:61437321
Command: 2145 response:61457321 
Command: 2146 response:61461010 
Command: 2151 response: 
0: 61511F0F1709 
1: 1C19011DOF0000 
Command: 2152 response: 
0: 61521F171F0F 
1: 1E01011E000000 
Command: 2153 response: 
0: 61531F1F1F1D 
1: 16191F1F100000 
Command: 2154 response: 
0: 615400171804 
1: 07090200100000 
Command: 215f response: 
0: 615F1F0F1709 
1: 1C19011D0F1F17 
2: 1F0F1E01011E00 
3: 1F1F1F1D16191F 
4: 1F100017180407 
5: 09020010000000 
Command: 2170 response: 
0: 616FFBEE9E64 
1: 0F5E0000FDFEFF 
2: 040F800000FFFF 
3: DB64FFE0000005 
4: F043A410200000 
5: 00000000000000 
6: 00000000000000 
7: 00000000000000 
Command: 2171 response: 
0: 617145444331 
1: 36202020202000 
Command: 2172 response:61723120202020 
Command: 2173 response: 
0: 61734F39304A
1: 54443735202000 
Command: 2174 response: 
0: 6174574A4F41 
1: 53313530202000 
Command: 2175 response: 
0: 617530342E35 
1: 4A5F342E313000 
Command: 21a9 response: 
0: 61A800036393 
1: 111362B3045F13 
2: 03989800000135 
3: 9FDB078E102204 
4: 2F55AC000002D0 
5: 0DD86400002DEC 
6: 000500002DEC00 
7: 020000542B0000 
Command: 21b0 response:61B011 
Command: 21b5 response:61 B400006094 
Command: 21b9 response:61 B92F03 
Command: 21cb response:61 CB034A3DDE 
Command: 21db response:61DB414420 
Command: 21dc response:61DC314144 
NO DATA until end.

I did also:

ATZ: ELM327 v2.1
ATH1: OK
ATSP6: OK
ATSH7E0: OK

20:
7E9 06 41 00 80 00 00 01
7E8 06 41 00 98 3B 00 11

3E:
7E9 06 41 00 80 00 00 01
7E8 06 41 00 98 3B 00 11

ATCRA5E8: OK
AA0329: NO DATA
AA0118: NO DATA

Thank You in advance

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 [13] 14 15 16 17 18 19 20

WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.098 seconds.

Forums

Forums

Guest