Torque

Forums

Forums

Guest  

Show or hide header
Welcome Guest, posting in this forum require registration.

Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » ELM 327 MS/HS usb

Pages: [1]
Author Topic: ELM 327 MS/HS usb
ChipDJF
Member
Posts: 7
Post ELM 327 MS/HS usb
on: January 23, 2022 (GMT)

I have a usb elm327 with the ms/hs switch. it works with the forscan app on my android phone. it also works with the WCH demo app. When I try it with Torque I get the popup box for Torque allow Torque to connect to USB save as default. nothing happens. it never opens the Torque app. But if I use the wch demo app popup box it connects right away. also if I swipe down on the phone I have a notification saying Torque is idle waiting for USB OBD adapter :35000 lo…
O YEA and I have Torque PRO. Any ideas

piemmm
Administrator
Posts: 6629
Post Re: ELM 327 MS/HS usb
on: January 23, 2022 (GMT)

Hi

Do you have a web link to the adapter description?
ChipDJF
Member
Posts: 7
Post Re: ELM 327 MS/HS usb
on: January 23, 2022 (GMT)

Looks like this. I am looking for the link to ebay where I bought it.
ChipDJF
Member
Posts: 7
Post Re: ELM 327 MS/HS usb
on: January 24, 2022 (GMT)

OK found it. This is the one I have.
https://www.ebay.com/itm/265122558621
ChipDJF
Member
Posts: 7
Post Re: ELM 327 MS/HS usb
on: January 24, 2022 (GMT)

I can’t figure this forum out after I post all I can see is your first reply. am I doing something wrong?

Hi

Do you have a web link to the adapter description?
piemmm
Administrator
Posts: 6629
Post Re: ELM 327 MS/HS usb
on: January 24, 2022 (GMT)

Hi!

No it’s just the spam filter which blocks first and asks questions later (I manually unhide posts accidentally automatically marked as spam by the system)

I’ll see if I can get hold of one of those and see if there’s an issue. As a general rule, if you’re using one, go into the Torque settings -> OBD2 adpater settings -> select the connection type as USB (at the top) and then scroll down and choose the device and baud rate that match your adapter.

After that, quit torque, unplug the adapter, then re-insert it and it should work if it’s supported (if it does or not after these steps, please let me know as I can then look at improving/updating that part)
Vasilich
Member
Posts: 223
Post Re: ELM 327 MS/HS usb
on: January 24, 2022 (GMT)

i have almost the same adapter (also USB, with that MS switch) – works perfectly with Torque! USB speed can be set to “auto”, or to 38400 (in a hope that it will save some milliseconds when initiating connection).
ChipDJF
Member
Posts: 7
Post Re: ELM 327 MS/HS usb
on: January 24, 2022 (GMT)

OK thanks.
I have tried every baud rate. Tried uninstall reinstall. Tried removing all other scanner apps.
I do know that on my laptop the driver is ch340 and the provider is wch.cn
piemmm
Administrator
Posts: 6629
Post Re: ELM 327 MS/HS usb
on: January 24, 2022 (GMT)

Hi!

The ch340 is a supported chip, so it should be working if you have followed the steps above
ChipDJF
Member
Posts: 7
Post Re: ELM 327 MS/HS usb
on: January 26, 2022 (GMT)

I just bought a Bluetooth elm327 And everything works fine.
I really wanted to use usb. Maybe in the future I will buy a better usb ELM.

ChipDJF
Member
Posts: 7
Post Re: ELM 327 MS/HS usb
on: January 26, 2022 (GMT)

OK I have OCD. So I uninstalled all OBD and USB Apps. I have a lot of things that connect to my phone using USB. So I uninstalled them to. Ran a cleaner on my phone then reinstalled Torque went to settings set it to USB, Set BAUD Rate to Auto. Closed app plugged in USB ELM. I got the popup use as default app check yes.
BANG!!! APP OPPENS CONNECTED!!!!
Works perfect. Must have been something to do with all the crap on my phone.
Thankyou for all your help! And Thank you Vasilich
Pages: [1]
WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.036 seconds.

  Follow me on twitter