Torque

Forums

Forums

Guest  

Show or hide header
Welcome Guest, posting in this forum require registration.

Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » excessive CPU load

Pages: [1]
Author Topic: excessive CPU load
Vasilich
Member
Posts: 218
Post excessive CPU load
on: January 19, 2022 (GMT)

Hello Ian,
thanks for your great app.
I use Torque already several years (changed car once already :) ). I don’t know when it has started to happen, but Torque app loads completely one of my HU’s cores, so in quadCore CPU i have always 25% load when Torque is running. First i thought that i have put too many gauges on my screen, but after some experimenting i found out that Torque loads one core completely (same 25% CPU load) even if it cannot connect to ECU (ignition OFF, so no PID refresh is happening).
How can i help to find the culprit of that excessive CPU load by Torque?
My HU: Joying on Intel SoFIA (quadcore), 2GB RAM, OBD2 adapter on PIC18F25K80 with FTDI chip connected to USB.
Thanks in advance.
piemmm
Administrator
Posts: 6629
Post Re: excessive CPU load
on: January 20, 2022 (GMT)

Hi!

What version of the app are you using? (This is in adapter status, near the bottom of the screen)

edit: think I have found the issue – limited to USB and the way it works – I’ll see if I can improve this a bit once I’ve proved it is what I think it is on a test setup
piemmm
Administrator
Posts: 6629
Post Re: excessive CPU load
on: January 20, 2022 (GMT)

Found and fixed – this will be in the next 1.12.3 beta
Vasilich
Member
Posts: 218
Post Re: excessive CPU load
on: January 20, 2022 (GMT)

Great! will report back as soon as i get this beta on my HU.
Vasilich
Member
Posts: 218
Post Re: excessive CPU load
on: January 22, 2022 (GMT)

installed 1.12.5 and confirmed that now Torque takes 5 -10% of CPU. Thanks for fixing it!
As a bonus i got PID scan speed boost from 30-35 PIDs/s to stable 50 PIDs/s.
Pages: [1]
WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.021 seconds.

  Follow me on twitter