Torque

Forums

Forums

Guest  

Show or hide header
Welcome Guest, posting in this forum require registration.




Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » torque pro cause abs light on

Pages: [1]
Author Topic: torque pro cause abs light on
hover
Member
Posts: 3
Post torque pro cause abs light on
on: January 2, 2022 (GMT)

torque pro cause abs light on

I use odb2 scanner with torque pro. When torque pro is connected, I got abs light on. If I do not use torque pro, other scanner like doctor scanner has no issue. My car is 2017 toyota camry. I guess torque pro does not compatible with new toyota car. If I use old toyota car with same obd2 and torque pro, no any abs light on.

Torque pro keeps tell us that is caused by odb2 or other issue. Why the same obd2 and torque pro works fine on old toyota car?

Thanks.

piemmm
Administrator
Posts: 6623
Post Re: torque pro cause abs light on
on: January 2, 2022 (GMT)

Hi!

You likely need to set the protocol in the vehicle profile to the specific protocol for your vehicle – Torque asks the adapter to locate the protocol itself when it starts, and the adapter will cycle through several protocols.

Selecting the correct protocol for your vehicle in the vehicle profile will stop the adapter trying to select the wrong protocol (and it’s a timing thing)

hover
Member
Posts: 3
Post Re: torque pro cause abs light on
on: January 4, 2022 (GMT)

Hi,

Thanks for your reply. I did pre-select the protocol. I remember the post you mentioned. I select CAN 54bit protocol in toreque pro application, but still the same issue. My car is 2017 toyota camry 4cylinder 2.5Lite LE. Still same problem. On that post it tell me to choose right protocol for my toyota and that CAN 54bit is the right one as I know. Any other ideas you have?

Anyway, same thing works fine on old toyota. I should say that new torque pro application does not work well with new toyota cars.

piemmm
Administrator
Posts: 6623
Post Re: torque pro cause abs light on
on: January 4, 2022 (GMT)

Hi!

Nothing has changed in the initial OBD connection code between the old and new versions, that code is still the same

You’ll want CAN 11 it or 29 bit (there is no 54bit option) in the settings. I would suggest leaving it on (Automatic – Fast protocol scan) which also may work around the issue

Hiej
Member
Posts: 173
Post Re: torque pro cause abs light on
on: January 4, 2022 (GMT)

@hover:

try to enable the use of alternative OBD header on vehicle profile.

not sure it fix the issue for you, but in my case (2010 Mazda 3) using alternative obd header I fixed the error warning light of Blind Spot Assist.

– – – – – – – – – – – – – – – – – – – – – – –
2010 Mazda 2.2d – 185
OBDLink MX – SGS7
– – – – – – – – – – – – – – – – – – – – – – –

Pages: [1]
WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.021 seconds.

  Follow me on twitter