Torque

Forums

Forums

Guest  

Show or hide header
Welcome Guest, posting in this forum require registration.




Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » Torque vehicle test report screen

Pages: [1]
Author Topic: Torque vehicle test report screen
gregoc1
Member
Posts: 2
Post Torque vehicle test report screen
on: April 15, 2021 (GMT)

On my vehicle test report screen.

Soooooo . . . . Could someone help me out with this stuff.
I need help decifering.

TID: CID:
min :31,872
current:32671

In green background then ??. On right side.
__
And there is plenty more below on my torque screen.

moreause
Member
Posts: 584
Post Re: Torque vehicle test report screen
on: April 15, 2021 (GMT)

personally i would say forget TID test

was never able to find good data of it

when i tried it one test was failing in torque, and passing in another app

but there was no real issue with the car anyway

from what i saw TID standard is kind new and is more car by car basis …instead of all the same for OBDII

Capp777
Member
Posts: 2912
Post Re: Torque vehicle test report screen
on: April 15, 2021 (GMT)

The following link may help your
understanding of mode six…

https://torque-bhp.com/forums/?wpforumaction=viewtopic&t=15707.0

Test IDs and Component IDs can be standard
based and manufacturer based.

Look for an OBD Summary document for your
vehicle which may list the IDs for your vehicle.

Ford documents mention multiplying the test
result value by a scale factor to yield units like
voltage, etc.

In your min example the data value is greater
than the limit which should indicate Pass.

If the data value was less than the limit…
should indicate Failed.

You will need the OBD standard or manufacturer
OBD Summary for the TID/CID descriptions.

When a DTC is present mode six data may
assist in troubleshooting the problem when
the ID descriptions are known.

Pages: [1]
WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.079 seconds.

  Follow me on twitter