Torque

Forums

Forums

Guest  

Show or hide header
Welcome Guest, posting in this forum require registration.

Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » Dodge Viper PID for Oil Temp and Oil Pressure

Pages: [1]
Author Topic: Dodge Viper PID for Oil Temp and Oil Pressure
mrk
Member
Posts: 7
Post Dodge Viper PID for Oil Temp and Oil Pressure
on: August 15, 2020 (GMT)

Hi guys,

My Torque Pro is not displaying any information for Oil Temp and there is no option to see Oil Pressure.

Can anyone help me with the PIDs (along with the equation, units, etc.) for these two sensors?

Your help is greatly appreciated!!!
mrk
Member
Posts: 7
Post Re: Dodge Viper PID for Oil Temp and Oil Pressure
on: August 15, 2020 (GMT)

Forgot to mention, it’s a 2005 model.

Would really appreciate any help!
mrk
Member
Posts: 7
Post Re: Dodge Viper PID for Oil Temp and Oil Pressure
on: August 15, 2020 (GMT)

Ah….there’s one more….Fuel Pressure :-)

So, all in all, I am looking for PIDs and other relevant information for these three:

1. Oil Temperature
2. Oil Pressure
3. Fuel Pressure

Your help is greatly appreciated!!
moreause
Member
Posts: 632
Post Re: Dodge Viper PID for Oil Temp and Oil Pressure
on: August 24, 2020 (GMT)

i would say start by checking if those sensor even exist

my 2005 srt-4 … i know it’s not a viper ..but same era had none of these sensor

cintakc
Member
Posts: 1637
Post Re: Dodge Viper PID for Oil Temp and Oil Pressure
on: August 25, 2020 (GMT)

Oil Pressure and Fuel Pressure should work on your car
mrk
Member
Posts: 7
Post Re: Dodge Viper PID for Oil Temp and Oil Pressure
on: August 29, 2020 (GMT)

Quote from moreause on August 24, 2020
i would say start by checking if those sensor even exist

my 2005 srt-4 … i know it’s not a viper ..but same era had none of these sensor

It does have Oil Temp and Oil Pressure sensor.

The car has factory gauges.

I wanted to read the digital number and double check the calibration/needle positions.

mrk
Member
Posts: 7
Post Re: Dodge Viper PID for Oil Temp and Oil Pressure
on: August 29, 2020 (GMT)

Quote from cintakc on August 25, 2020
Oil Pressure and Fuel Pressure should work on your car

So what do I check since they are not working?

cintakc
Member
Posts: 1637
Post Re: Dodge Viper PID for Oil Temp and Oil Pressure
on: August 29, 2020 (GMT)

try this external PID and give the hex answer in PID Test mode

PID: 215C
Long Name: External PID1
Short Name: PID1
Minimum Value: 0
Maximum Value: 300
Scale Factor: x1
Unit Type: psi
Equation: A
ODB Header: 8112f1
mrk
Member
Posts: 7
Post Re: Dodge Viper PID for Oil Temp and Oil Pressure
on: September 1, 2020 (GMT)

What is the hex value for PID Test Mode?

Sorry, I’m new to this.

I did enter all the info as you said but it didn’t work.

When I tested it, it showed the following info:
—-

Testing PID
Result for equation: [No response]
Command: 215c
Response: NO DATA

——-
cintakc
Member
Posts: 1637
Post Re: Dodge Viper PID for Oil Temp and Oil Pressure
on: September 2, 2020 (GMT)

on the Adapter Status tab, look at which protocol Torque connects to your car
mrk
Member
Posts: 7
Post Re: Dodge Viper PID for Oil Temp and Oil Pressure
on: September 5, 2020 (GMT)

J1850 VPW (10.4K)
cintakc
Member
Posts: 1637
Post Re: Dodge Viper PID for Oil Temp and Oil Pressure
on: September 5, 2020 (GMT)

I have no data for this protocol
Pages: [1]
WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.033 seconds.

  Follow me on twitter