Torque

Forums

Forums

Guest  

Show or hide header
Welcome Guest, posting in this forum require registration.

Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » Custom PID Translation

Pages: [1]
Author Topic: Custom PID Translation
peternarbus
Member
Posts: 1
Post Custom PID Translation
on: June 17, 2020 (GMT)

Hello –

I would like to use Torque to read my 2019 Nissan Frontier transmission inlet and outlet temps. So far the only scanner I have found to read them is Scangauge 2. They list the custom PIDs on their website for my vehicle and I entered them and the work OK.

I would like to use Torque Pro but do not know how to translate the Scangauge codes to Torque codes. Here are the Scanauge codes:

Trans Temp 1
TXD: 0518110B
RXF: 026200004000
RXD: 2008
MTH: 0090005FFD8

Trans Temp 2
TXD: 0518110C
RXF: 026200004000
RXD: 2008
MTH: 00090005FFD8

The temperature is reported in degrees F.

How can I use this information to add a custom PID to Torque Pro?

Scale Factor
Equation
OBD Header
Diagnostic start command
Diagnostic stop command

Thank you,
cintakc
Member
Posts: 1661
Post Re: Custom PID Translation
on: June 18, 2020 (GMT)

https://torque-bhp.com/forums/?wpforumaction=viewtopic&t=352.0
try this
PID: 22110B
Scale Factor: x1
Equation: A*9/5-26
OBD Header: 518
Diagnostic start command:
Diagnostic stop command:

maybe this is not quite the correct decryption
Pages: [1]
WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.032 seconds.

  Follow me on twitter