piemmm, please correct the USB transfer rate – > 460800 to 5000000.
A much needed fix for everyone!!!

piemmm I think you have a program error
in the settings for the speed of operation of the USB ELM327 adapter, you are offered a list of speeds that you can choose:
the last option 460800 is the wrong value, it needs to be replaced with 500000, since the divider with which you can configure the adapter speed can only be an integer and take such values next to the speed 460800 this is (444444,500000)
https://drive.google.com/file/d/1Jmb_SEsW06Awj_nTNH3hh_omOCOVhW3H/view?usp=sharing
I transferred the USB adapter to a speed of 500000 and my adapter works fine with other programs where you can choose a speed of 500000, and the Torque Pro program does not work either at a speed of 460800 or at a speed of 500000
I think you need to adjust the speed by 500000

BaudRate – PP 0C value
(kbps)

19.2—D0 (208)
38.4—68 (104)
57.6—45 (69)
115.2–23 (35)
230.4–11 (17)
444.4–09 (9)
500—-08 (8)

cintakc, support you, indeed the speed need remaking with 460800, on speed 500000.

I welcome Jan!
Jan, in November you promised to add a new function – the adder function.
It ‘s April, and you haven ‘t added the feature yet!
When can you do what you promised?

Hi Ian Hawkins.
Yes, I also confirm that saving parameters in the program does not work.
After restarting the program, the value may be zero.
1. Ian Hawkins add a separate function for saving a parameter and writing values to the profile.
People have been waiting for it for 9 months!
2. you Need a cumulative function in which the parameter was accumulated and the value in it was not reset.
3. Also, another very necessary function: IF, THEN, OTHERWISE.

WHAT’S THE PROBLEM?
WHY DON’T YOU ANSWER PEOPLE’S MESSAGES!