piemmm, v1.10.110
now works, checked with CP2102, CH340
https://yadi.sk/i/U65aKzcQJuaYbg
https://yadi.sk/i/7NE0riv0lxuizA

Hi! This should definitely be working – To double check – you’re using the version 1.10.110 on the beta track, and not the currently released normal version on google play?

piemmm, Your program in 1.10.110 began to work with the adapter on the chip PIC18F25K80 chip from FTDI RS232.
Great job Ian!
Thank you!

*************************************************************
Once again:
1. Make memory function, to continue further data counting, after reconnecting Torque (for example, to count the hours of total engine operation, mileage per period, fuel consumption per period and much more)
This function can be used in many calculations used by users.
2. Make a text label. (ability to set a name for each screen)
3. Allow the user to change the color of the round and square indicator (separately the color of the indicator name, separately the color of the indicator value)
4. Add horizontal indicator and vertical indicator to display values.
Example:
https://drive.google.com/open?id=12UeTyPeJpy2jiGk1TlTi2dAYNg2Tw8Rj
5. A formula for solving user problems. (for example, the comparison formula: if; then)
6. Add a linear display of values, with the ability to resize.
Example:
Speed km / h……………………………………..86
Voltage, V……………………………………..13.89
Oil temperature, °C…………………………….98.5

Will you be able to implement them?

Hi!

crashmultiz: What type of OBD2 compliant adapter are you using? It must be an ELM327 compatible adapter – do you have a web link to it?

K Line FTDI OBD2 USB not supported

Greetings Ian.
Faced with such a problem, when the program is running and already connected to Android, when you try to change the settings of the indicator on the desktop, the program crashes, the program loses contact with the ELM USB adapter.

chip PIC18F25K80 chip from FTDI RS232

Hi!

Which setting are you changing (which part of the app) which is cause the app to close and I’ll try to reproduce here and fix it

(There are a couple of issues with the charts I’m also looking at – currently Android 4.0 won’t work with them but it should work from android 5+ properly, due to the chart vendor (annoyingly) not supporting android4.0 anymore (I *think* it might work in 4.1/4.2, but haven’t tested that yet)

Ian Hawkins, Unlock oniava account, why do you keep blocking it?

Quote from admin on November 10, 2019

Capp777: I like the way you think – that /should/ work, though it may need to change in the editor a bit (havent had time to test myself either) – I may add a function (that’s less of a hassle to tyoe) to do this after I’ve got .107 out of the way with

Greetings Ian Hawkins.
You promised to add a function to remember parameters.
When will it be possible to see it?
Now you have 114 version

Quote from oniava on November 11, 2019

I rummaged the entire Internet, all forums, but so and not found formula, which is used you Have in program Torque, for parameter:
Run time since ancient times = PID [1F]
I understand that You are busy, but could you tell me the formula for conversion of units of time to that mean?
https://drive.google.com/open?id=1ROseHe5mIzT_fzHTysU38emvYnmSjSvd
***********************************************************
Ian Hawkins, it’s been another 10 days.What about the memory feature you promised in version 107
Already 114 version You have.

What about the formula, show it to me?

What about the crash of Your app when editing your profile?

I wrote to You in private mail, please answer!

Why do you ignore your users?

Thanks in advance!

I have posted this in the forum but the messages dissapear (maybe is because I include a link), but with 1.8 I can see my map view, on 1.10 (and beta) I see an empty map:

https://imgur.com/a/GF4OwLm

:/

Unlock please user ONIAVA.