Torque

Forums

Forums

Guest  

Show or hide header
Welcome Guest, posting in this forum require registration.




Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » Calibrate Adapter Voltage

Pages: [1]
Author Topic: Calibrate Adapter Voltage
hammerheadfistpunch
Member
Posts: 1
Post Calibrate Adapter Voltage
on: August 21, 2019 (GMT)

I looked through the forums and I found some information [capp777] about calibrating the Adapter voltage. My 97 Toyota doesn’t report command module voltage and I only get it from the adapter, which works but my vehicle also has notorious voltage drop in the wiring and Im trying to find a reliable method for battery voltage. I know the difference between the reported adapter voltage and the open circuit and closed circuit battery voltages as measured with a quality Voltmeter. What I am looking for is a way to use this information to calibrate the adapter voltage is display closer to the actual battery voltage.

I went through the forum as best I could but I couldn’t understand a lot of it, including sending an ODBII command. Is there a way to do this? Either through changing the built in PID or creating an external one?

Capp777
Member
Posts: 2994
Post Re: Calibrate Adapter Voltage
on: August 22, 2019 (GMT)

Are you able to create your own custom voltage
pid with an equation using a corrective zero and
span?

([ff1238]*1.0)+0.0

Pages: [1]
WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.009 seconds.

  Follow me on twitter