Torque

Forums

Forums

Guest  

Show or hide header
Welcome Guest, posting in this forum require registration.




Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » Custom init string for JDM Toyota Mark x

Pages: [1]
Author Topic: Custom init string for JDM Toyota Mark x
theryanofjudah
Member
Posts: 9
Post Custom init string for JDM Toyota Mark x
on: August 13, 2019 (GMT)

Hello Everyone,

Ive been at this for years now with countless Obd2 scanners and none has been successful with Jdm Vehicles .. This time i purchased BAFX3127 scanner from amazon . I happen to find a forum where init strings were being discussed i tried the init strings for a Mr2 and toyota altezza . Sad to say it did not work. So here i am seeking your help. Hopefully someone here has mastered this..
I own a Toyota Mark X 2008 JDM 2500cc
Chassis GRX120
Engine 4GR
in need of init string for 2008 Toyota Mark x Jdm

It would be a blessing to get this working with Torque..
Thanks In advance

cintakc
Member
Posts: 1366
Post Re: Custom init string for JDM Toyota Mark x
on: August 14, 2019 (GMT)

initialization string for your car
atsp6\natsh7e0
but only rows will not be enough need to apply external PIDs

theryanofjudah
Member
Posts: 9
Post Re: Custom init string for JDM Toyota Mark x
on: August 14, 2019 (GMT)

Hi,
Thank you for your speedy reply. I just tried the code but it did not work.. Are there other options I should click or uncheck before saving the code and trying again

thx

cintakc
Member
Posts: 1366
Post Re: Custom init string for JDM Toyota Mark x
on: August 14, 2019 (GMT)
"Name","ShortName","ModeAndPID","Equation","Min Value","Max Value","Units","Header"
"Toyota Design load on the engine","Load engin","2104","A*100/255","0","100","%","7E0"
"Toyota Engine coolant temperature","ECT","2105","A-40","0","215","C","7E0"
"Toyota Short-term fuel correction bank 1","ST B1","2106","(A*199.15/255)-100","-100.00","99.15","%","7E0"
"Toyota Long-term fuel correction bank 1","LT B1","2107","(A*199.15/255)-100","-100.00","99.15","%","7E0"
"Toyota Engine RPM","RPM","210C","(A*64)+(B*63/255)","0","16383","rpm","7E0"
"Toyota Vehicle speed","Speed","210D","A","0","255","km/h","7E0"
"Toyota Ignition timing","Ign timing","210E","(A*127.5/255)-64","-64.0","63.5","degree","7E0"
"Toyota Intake air temperature","Int Temp","210F","A-40","-40","215","C","7E0"
"Toyota Intake Air flow","Air flow","2110","(A*2.56)+(B*0.01)","0","655.35","gr/s","7E0"
"Toyota Throttle position","Trtl Pos","2111","A*100/255","0","100","%","7E0"
"Toyota U Oxygen Sensor Bank 1 ?1","U O2 B1S1","2114","A*1.274/255","0","1.274","volt","7E0"
theryanofjudah
Member
Posts: 9
Post Re: Custom init string for JDM Toyota Mark x
on: August 16, 2019 (GMT)

Hi cintakc ,

The information you posted seem to be really impressive, however im a novice in this field and i have not a clue as to how to get this in operation.. If you do have the time to walk me through this that would be great..

Thx Much
R

cintakc
Member
Posts: 1366
Post Re: Custom init string for JDM Toyota Mark x
on: August 16, 2019 (GMT)

-in the profile, select the preferred protocol ISO 15765-4 (11/500)
-In the profile, put the checkbox “Use alternate OBD header”
-in the initialization string in the profile atsp6\natsh7e0
-csv file with PIDs placed in the .torque\extendedpids folder
-in settings – section management external PID – add your PID set
-in the dashboard, create new devices from the list of PIDs of your set

theryanofjudah
Member
Posts: 9
Post Re: Custom init string for JDM Toyota Mark x
on: August 17, 2019 (GMT)

Hi Cintakc,

I’m thankful for all the information.
However I’m lost when I got to the csv part of it.
I’m now wondering is it possible to pay for a copy of torque with all this information for my specific vehicle already pre loaded. Like I said I’m a novice . I’ve been trying to get this sorted out over 5 plus years 1st with a nissan tiida jdm and now with a Toyota mark x..

cintakc
Member
Posts: 1366
Post Re: Custom init string for JDM Toyota Mark x
on: August 18, 2019 (GMT)

download the finished Toyota.csv file and place it in the folder .torque\extendedpids
https://yadi.sk/d/Ut17QUc21nnPIA

theryanofjudah
Member
Posts: 9
Post Re: Custom init string for JDM Toyota Mark x
on: August 31, 2019 (GMT)

Hi,
Ive downloaded the csv file however i dont have a “.torque\extendedpids” folder to place the flie in . I have cache
dashboards
retrylist.dat
themeDir
tripLogs
vehicles
should i ctrate a “extendedpids” folder?

cintakc
Member
Posts: 1366
Post Re: Custom init string for JDM Toyota Mark x
on: August 31, 2019 (GMT)

folders with a dot in front are hidden folders, to make them visible, you need to give permission in the explorer “Show hidden folders”

theryanofjudah
Member
Posts: 9
Post Re: Custom init string for JDM Toyota Mark x
on: August 31, 2019 (GMT)

Hi,
In .torque Created a ” extendedpids” I then followed your instructions.
“in settings – section management external PID – add your PID set”
I created Pid sets using the information from the Toyota Can Csv files
That went well..
I went to settings “manage extra pids/sensors
Add custom pid
Then I added predefined list which gave me the option to upload Toyota Can..
I connected to the car but the app cant load my model … im stuck here

cintakc
Member
Posts: 1366
Post Re: Custom init string for JDM Toyota Mark x
on: September 1, 2019 (GMT)

Now you need to create new devices on the dashboard by selecting them from the csv file list

theryanofjudah
Member
Posts: 9
Post Re: Custom init string for JDM Toyota Mark x
on: September 2, 2019 (GMT)

wow. wow . wow.” cintakc” may God pour out his richest blessings on you. It worked my guages came alive . Thank you so much…… Thank you for your patience .. Thank you .. thank you…

theryanofjudah
Member
Posts: 9
Post Re: Custom init string for JDM Toyota Mark x
on: September 3, 2019 (GMT)

Now that I’ve gotten the hang of this id love to get the pid for battery voltage / transmission temperature and mpg..

iwamae
Member
Posts: 2
Post Re: Custom init string for JDM Toyota Mark x
on: November 22, 2019 (GMT)

Hi,
Please help. I recently bought a OBD11 device online, installed the torque app. But it doesn’t contact ECU
for my Toyota Mark x 2009 model 2Gr
Please help

Into cars

Pages: [1]
WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.315 seconds.

  Follow me on twitter