Forums

Guest
Welcome Guest, posting in this forum require registration. Username Password Remember me

Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » 05 f250 won't read trans temp

Pages: [1] 2

Author	Topic: 05 f250 won't read trans temp

Heavy_Duty

Member
Posts: 11

05 f250 won't read trans temp
on: February 25, 2019 (GMT)

I got a 05 f250 6.0 diesel. Everything works fine except it won’t read trans temp. Tried method 1, 2, and 3. Also tried just trans temp. My snap on scanner reads tft just fine. Do I need a different custom pid?

Capp777

Member
Posts: 2993

Re: 05 f250 won
on: February 25, 2019 (GMT)

Try posting the raw hex responses for the
TFTs you tried by testing each while in the
pid editor and connected to your vehicle.

Heavy_Duty

Member
Posts: 11

Re: 05 f250 won
on: February 25, 2019 (GMT)

I’m new to this app. How do I do that?

Capp777

Member
Posts: 2993

Re: 05 f250 won
on: February 25, 2019 (GMT)

While connected to vehicle…

Goto Manage Extra Sensors/Pids to
see a list of your Ford Predefined Pids
which I assume you added already.

Find the pids for TFT and press to edit
with the pid editor.

Near the bottom of the editor page press
TEST to see the raw hex response from your
vehicle.

Setting headers On with ATH1 may be helpful
if more than one module responds.

Heavy_Duty

Member
Posts: 11

Re: 05 f250 won
on: February 25, 2019 (GMT)

When I was looking at that last night I hit test an it said no response

Capp777

Member
Posts: 2993

Re: 05 f250 won
on: February 25, 2019 (GMT)

Can you look under the Adapter Status
icon information and tell me what
protocol your vehicle is using?

If CAN try headers 7E0 and 7E1.

If PWM try headers C410F1 and C418F1.

Edited.

Heavy_Duty

Member
Posts: 11

Re: 05 f250 won
on: February 25, 2019 (GMT)

Iso15765-can11/500
How do I change it?

Capp777

Member
Posts: 2993

Re: 05 f250 won
on: February 25, 2019 (GMT)

Try testing the TFT pids again after changing
header field to 7E0 or 7E1.

Looking for a 62… for a successful hex response.

Your vehicle’s network is using 11 bit CAN to
communicate.

Heavy_Duty

Member
Posts: 11

Re: 05 f250 won
on: February 26, 2019 (GMT)

Still says “no response”
All 3 methods and the transmission temp pids

Capp777

Member
Posts: 2993

Re: 05 f250 won
on: February 26, 2019 (GMT)

You might try using header 7DF to see if
a different module responds.

I also suggest you look on Ford specific forums
for your 6.0L to see if someone has solved this
problem before.

Sorry I couldn’t help you further.

Heavy_Duty

Member
Posts: 11

Re: 05 f250 won
on: February 26, 2019 (GMT)

I appreciate all the help. It’s just weird that my snap on scanner reads it just fine and everything else shows up like it should on torque.

MPD56

Member
Posts: 276

Re: 05 f250 won
on: February 26, 2019 (GMT)

Quote from admin on October 24, 2011
Hi!

Hm, If you’re having problems with that PID, edit the PID and change the header from ‘Auto’ to ‘TCM’ and see if that makes a difference (and let me know if it works so I can update the PID here)

Thanks

Ian
END

MPD56 REply
Try this

Heavy_Duty

Member
Posts: 11

Re: 05 f250 won
on: February 27, 2019 (GMT)

I’ve already tried that as well. There are actually 4 different pid choices for trans temp.
1) transmission fluid temp method 1
2) transmission fluid temp method 2
3) transmission fluid temp method 3
4) transmission temp

I’ve tried all 4, 1 & 2 say tcm. The method 3 says C410F1 . transmission temp says auto. All under header

Heavy_Duty

Member
Posts: 11

Re: 05 f250 won
on: February 28, 2019 (GMT)

I deleted the top line “obd2 mode and pid” it will read now but the temp always reads 213°

cintakc

Member
Posts: 1661

Re: 05 f250 won
on: February 28, 2019 (GMT)

member of this forum F-150Torqued gave out information for F150 including for TFT, try the PID for F150

try this external PID
PID: 221674
Long name: TFT count
short name: TFT
unit: count
equation: (A*256+B)*0.125
header: 7E1

Heavy_Duty

Member
Posts: 11

Re: 05 f250 won
on: March 1, 2019 (GMT)

Quote from cintakc on February 28, 2019
member of this forum F-150Torqued gave out information for F150 including for TFT, try the PID for F150

try this external PID
PID: 221674
Long name: TFT count
short name: TFT
unit: count
equation: (A*256+B)*0.125
header: 7E1

I deleted the 221674 and left that blank. When I did it started reading but stays at 213°

cintakc

Member
Posts: 1661

Re: 05 f250 won
on: March 1, 2019 (GMT)

I deleted the 221674 and left that blank

what for? screenshot in Test mode

Capp777

Member
Posts: 2993

Re: 05 f250 won
on: March 1, 2019 (GMT)

Without the correct mode/pid provided,
Torque will treat as a custom pid whose
value is from the given equation. The
variable data would be questionable since
it wasn’t read from a vehicle pid.

Did you ever test using header 7DF in case
the module is different from 7E0 or 7E1.

I would also be curious of the results if
you temporarily clear all the pids and manually
retype just the TFT pids.

Heavy_Duty

Member
Posts: 11

Re: 05 f250 won
on: March 5, 2019 (GMT)

It says

no response
Command 221674

7df doesn’t work either

cintakc

Member
Posts: 1661

Re: 05 f250 won
on: March 5, 2019 (GMT)

try this external PID
PID: 2211BD
Long name: TFT sensor volt
short name: TFT volt
unit: volt
equation: (((A*256)+B)/1024)*5
header: 7E1

Pages: [1] 2

WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.065 seconds.

Forums

Forums

Guest