Torque

Forums

Forums

Guest  

Show or hide header
Welcome Guest, posting in this forum require registration.

Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » Audi S3 8p - Vacuum problem

Pages: [1]
Author Topic: Audi S3 8p - Vacuum problem
ffichman
Member
Posts: 6
Post Audi S3 8p - Vacuum problem
on: January 26, 2019 (GMT)

I have an audi s3 8p and when I was using a motorola device the vacuum reading was working. now I switched to a samsung a6 and read no more. could anyone give an aid? the boost is reading normally.
Capp777
Member
Posts: 2993
Post Re: Audi S3 8p - Vacuum problem
on: January 26, 2019 (GMT)

You might want to check the boost
calculation method under adapter
settings for your new device.
ffichman
Member
Posts: 6
Post Re: Audi S3 8p - Vacuum problem
on: January 26, 2019 (GMT)

I tested MAP and ALT. Vacuum doesnt show nothing only 0
ffichman
Member
Posts: 6
Post Re: Audi S3 8p - Vacuum problem
on: January 27, 2019 (GMT)

the sensor information in the torque shows as the last value the 0. However in vcds I can see the information of the negative pressure the vacuum.
Capp777
Member
Posts: 2993
Post Re: Audi S3 8p - Vacuum problem
on: January 27, 2019 (GMT)

It seems odd that Boost is working but
vacuum is not since Boost=MAP-Baro()?

What is your MAP sensor showing?

With KOEO does MAP match atmospheric
conditions?
ffichman
Member
Posts: 6
Post Re: Audi S3 8p - Vacuum problem
on: January 30, 2019 (GMT)

As I said if I use the vcds the vacuum appears with the correct value. only at idle we have 280mbar in vcds. where 1000mbar would be equal to 0 bar
ffichman
Member
Posts: 6
Post Re: Audi S3 8p - Vacuum problem
on: February 2, 2019 (GMT)

Any help?
Capp777
Member
Posts: 2993
Post Re: Audi S3 8p - Vacuum problem
on: February 3, 2019 (GMT)

Still curious what Torque’s MAP sensor
is displaying. (Intake Manifold Pressure [0b]).

The absolute pressure should show
vacuum below 101.325 kPa.
ffichman
Member
Posts: 6
Post Re: Audi S3 8p - Vacuum problem
on: February 28, 2019 (GMT)

0bar
Pages: [1]
WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.029 seconds.

  Follow me on twitter