Torque

Forums

Forums

Guest  

Show or hide header
Welcome Guest, posting in this forum require registration.




Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » Mode6 to Live Data

Pages: [1]
Author Topic: Mode6 to Live Data
Babbels
Member
Posts: 3
Post Mode6 to Live Data
on: July 19, 2018 (GMT)

Hi,

I’m new to the forum but I’m using torque for years.
The question I have is simple. Is it possible to convert data from mode6 to live data.
When I do O2 tests for O2 Monitor Heater Bank 1 Sensor 1 torque shows:
Mid: Tid: d
a min(760), a max(6553.5) and a current value(820.2) .

When I add an custom PID with 0641 I get following results:
00A
0:46418D162003 (here the last digits change live)
1:1DB0FFFF555555

Is it possible to find the right equitation to get live data?

Capp777
Member
Posts: 2861
Post Re: Mode6 to Live Data
on: July 19, 2018 (GMT)

Quote from Babbels on July 19, 2018
Hi,

I’m new to the forum but I’m using torque for years.
The question I have is simple. Is it possible to convert data from mode6 to live data.
When I do O2 tests for O2 Monitor Heater Bank 1 Sensor 1 torque shows:
Mid: Tid: d
a min(760), a max(6553.5) and a current value(820.2) .

When I add an custom PID with 0641 I get following results:
00A
0:46418D162003 (here the last digits change live)
1:1DB0FFFF555555

Is it possible to find the right equitation to get live data?

End Quote.

8D 16 20 03 1D B0 FF FF 55 55 55

0x2003 = 8195
0x1DB0 = 7600
0xFFFF = 65535

((C*256)+D)/10
((E*256)+F)/10
((G*256)+H)/10

is my guess from your data.
Let me know if it works…

Babbels
Member
Posts: 3
Post Re: Mode6 to Live Data
on: July 20, 2018 (GMT)

Works but with
((D*256)+É)/10

Thanks

Pages: [1]
WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.072 seconds.

  Follow me on twitter