Torque

Forums

Forums

Guest  

Show or hide header
Welcome Guest, posting in this forum require registration.




Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » AUDI A6 3.0TDI 2009 - DPF

Pages: [1]
Author Topic: AUDI A6 3.0TDI 2009 - DPF
iSLK
Member
Posts: 1
Post AUDI A6 3.0TDI 2009 - DPF
on: April 17, 2018 (GMT)

Hello, I am looking PID to see if regeneration is in proces.

I am using Torque Pro with white ELM327 v1.5, check with ELM identifier.

I can see all necessary information (Catalyst temperatures (before/after DPF) + Regeneration proces + Last km from regeneration, % of meassured, % calculated DPF) throught VCDS + PC, but I woul like to see also in Torque Pro with ELM327 bluetooth adapter.

I was trying to do everything (make custom PID see below), but I can see only some basic data as (Speed, RPM, ERG, Coolant temp) but any of this values (Oil temperaturenot, Catalyst temperature Regeneration proces + Last km from regeneration, % of meassured, % calculated DPF)

Not working PID:
3C 60 2 Catalyst Temperature: Bank 1, Sensor 1
3D 61 2 Catalyst Temperature: Bank 2, Sensor 1
3E 62 2 Catalyst Temperature: Bank 1, Sensor 2
3F 63 2 Catalyst Temperature: Bank 2, Sensor 2

I woul like to see:
1) Distance in km since last regeneration
2) Percentage (%) of DPF saturation level
3) Percentage (%)of completion of the Regeneration progress as it happens
4) Average km between DPF Regenerations 5) DPF Temperature (this was already available)
6) Distance in km since DPF change/replacement
7) Catalyst temperature

Is there any feature how I can find PIDs that are coresponding to VCDS ?

Could anybody please to help me.

Thank you very much

Audi A6 3.0TDI 2009

Pages: [1]
WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.029 seconds.

  Follow me on twitter