Torque

Forums

Forums

Guest  

Show or hide header
Welcome Guest, posting in this forum require registration.




Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » Decimals and Adding PIDs

Pages: [1]
Author Topic: Decimals and Adding PIDs
morecircles
Member
Posts: 2
Post Decimals and Adding PIDs
on: April 2, 2018 (GMT)

1. Torque rounds off the equivalence ratio to one decimal place (ie. X.Y) but my lambda fluctuates between 0.80 to 1.00. How can I set the gauge to show the additional decimal of precision?

2. Is there anyway for one gauge to show the sum of two PIDs? I would like to display the sum of short term + long term fuel trims.

Thanks for any help!

Capp777
Member
Posts: 2861
Post Re: Decimals and Adding PIDs
on: April 3, 2018 (GMT)

If you use a digital display type, long pressing
the display will bring up a submenu where
you can set the number of places.

Create a custom pid with an equation like

Val{Long Name}+Val{Long Name}

or

[xx]+[yy]

Sorry I can’t remember if single quotes are
needed with the Val{} but long names must
match exactly.

XX and YY are the pid numbers shown in
Torquescan.

I am currently Torque less due to an error
in Google Play error:-11 so unable to give
you the missing data.

morecircles
Member
Posts: 2
Post Re: Decimals and Adding PIDs
on: April 3, 2018 (GMT)

Thank you.

Any way to enable additional decimals on the half-dial display? I need the min and max readings as well.

Capp777
Member
Posts: 2861
Post Re: Decimals and Adding PIDs
on: April 3, 2018 (GMT)

I have asked Ian awhile back about adding
the decimal places menu option to the
other display types but not implemented yet.

I wanted to change voltage readings to three
places for mV at the time for the main
process variable.

Edited.

Pages: [1]
WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.099 seconds.

  Follow me on twitter