Forums

Guest
Welcome Guest, posting in this forum require registration. Username Password Remember me

Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » Toyota 3.0 D4D 2007

Pages: [1]

Author	Topic: Toyota 3.0 D4D 2007

henry.13

Member
Posts: 6

Toyota 3.0 D4D 2007
on: January 11, 2015 (GMT)

Hi .
I have been struggling to get the elm327 to connect to the ecu now I have used a second one as well
Done some research on the obd2 plug mine is as follows

4 chasis ground
5 sens ground etc
7 K-line ISO & 9141 protocol
9 oem comm
11 , 12 , 13 oem reserved
15 L – line ISO & 9141 protocol
16 battery
This is what is wired on my obd2 plug

Advice plz ?

cintakc

Member
Posts: 1663

Re: Toyota 3.0 D4D 2007
on: January 11, 2015 (GMT)

more about cars

henry.13

Member
Posts: 6

Re: Toyota 3.0 D4D 2007
on: January 11, 2015 (GMT)

What info do you need

Capp777

Member
Posts: 2994

Re: Toyota 3.0 D4D 2007
on: January 11, 2015 (GMT)

Quote from Capp777 on December 22, 2013
Make sure your Toyota is fully OBDII
compliant. Diesels may not be until
2004 and later.

Some vehicles may require a custom init
string when “automatic” doesn’t work.

See this link for more info…

http://torque-bhp.com/wiki/Custom_Init

Edit:

Highly recommend the Track Recorder and
TorqueScan plugins for your Torque Pro.

End Quote.

http://torque-bhp.com/forums/?wpforumaction=viewtopic&t=819.0

cintakc

Member
Posts: 1663

Re: Toyota 3.0 D4D 2007
on: January 11, 2015 (GMT)

Quote from henry.13 on January 11, 2015
What info do you need

model, engine type

henry.13

Member
Posts: 6

Re: Toyota 3.0 D4D 2007
on: January 11, 2015 (GMT)

Model 2007

Engine number 1KD7365254 3.0l diesel engine
Tryed those line’s didn’t work

cintakc

Member
Posts: 1663

Re: Toyota 3.0 D4D 2007
on: January 11, 2015 (GMT)

car model?
HILUX SURF?
so that I could see in the scanner

cintakc

Member
Posts: 1663

Re: Toyota 3.0 D4D 2007
on: January 11, 2015 (GMT)

preferred protocol; ISO 14230-4 (5b,10.4k baud)
atsp4\natib96\natiia13\natsh8113f1

henry.13

Member
Posts: 6

Re: Toyota 3.0 D4D 2007
on: January 11, 2015 (GMT)

Thx will try it out

henry.13

Member
Posts: 6

Re: Toyota 3.0 D4D 2007
on: January 11, 2015 (GMT)

Hilux Raider d4d

henry.13

Member
Posts: 6

Re: Toyota 3.0 D4D 2007
on: January 11, 2015 (GMT)

Installed the plugins still no data re sieved not connected to ecu don’t know what els I can try . Did a scan with the plugin all error did scan with atsp4\natib96\natiia13\natsh8113f1 and full scan. Used custom header ATIB 96 \n ATIIA 13 \n ATSH8213F0 \n ATSP4 \n 0100 with prefered protocol

cintakc

Member
Posts: 1663

Re: Toyota 3.0 D4D 2007
on: January 11, 2015 (GMT)

try to program the terminal to issue commands manually and see a response from the ECU
Elm Basic
what is your version of the adapter

geoffreyKZH138V

Member
Posts: 8

Re: Toyota 3.0 D4D 2007
on: January 2, 2022 (GMT)

Quote from cintakc on January 11, 2015
Quote from henry.13 on January 11, 2015
What info do you need

model, engine type

cintakc, how can I hopefully get the custom init string for 2001 KZH138V Toyota Hiace Super Custom 1KZ-TE with 4 speed automatic
https://toyota.epc-data.com/regius_ace/kzh138v/110020/?frame_no=KZH138-1001058&ref=

geoffreyKZH138V

Member
Posts: 8

Re: Toyota 3.0 D4D 2007
on: January 2, 2022 (GMT)

Quote from cintakc on January 11, 2015
Quote from henry.13 on January 11, 2015
What info do you need

model, engine type

Pages: [1]

WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.04 seconds.

Forums

Forums

Guest