Forums

Guest
Welcome Guest, posting in this forum require registration. Username Password Remember me

Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » Comprehensive list of PID operators and functions

Pages: 1 2 3 4 5 [6]

Author	Topic: Comprehensive list of PID operators and functions

oniava

Member
Posts: 36

Re: Comprehensive list of PID operators and functions
on: February 3, 2019 (GMT)

Hello.
What formula I need to write to not show negative values?
If (value) is less than 0 then 0 is displayed.

oniava

Member
Posts: 36

Re: Comprehensive list of PID operators and functions
on: March 2, 2019 (GMT)

Hello.
The question is, are unable to solve it.
I have a Pid on kickbacks and bytes “A” almost always “0”, but may slip values from 0 to 10.
How can I write a formula to the digital indicator torque remained the maximum value for this byte?
Can help with the formula?

wanwagon

Member
Posts: 1

Re: Comprehensive list of PID operators and functions
on: October 28, 2019 (GMT)

Quote from rsfjr87 on October 6, 2018
And when the pid returns a multi-line response?
How can I select the bytes?

Makhamees

Member
Posts: 3

Re: Comprehensive list of PID operators and functions
on: November 3, 2019 (GMT)

whats that guys can somebody help

cthue

Member
Posts: 5

Re: Comprehensive list of PID operators and functions
on: November 29, 2019 (GMT)

Quote from cintakc on December 5, 2018
Wrangler TPMS 2016.csv

Does anyone know if cintakc is still on this forum? I’d like to talk with him about the Jeep Wrangler TPMS PIDs.

cintakc

Member
Posts: 1663

Re: Comprehensive list of PID operators and functions
on: November 30, 2019 (GMT)

Hi, what did you want to ask?

cthue

Member
Posts: 5

Re: Comprehensive list of PID operators and functions
on: November 30, 2019 (GMT)

Quote from cintakc on November 30, 2019
Hi, what did you want to ask?

Hi cintakc. I have a 2014 Wrangler, and was unable to get the TPMS PIDs you posted to work (it always displays 0). The Oil Pressure PID works great, thanks very much for that!

I’d like to talk with you about trouble-shooting the TPMS. If you’d prefer email, you can reach me colonelkurtz at outlook dot com

Regards!

cintakc

Member
Posts: 1663

Re: Comprehensive list of PID operators and functions
on: November 30, 2019 (GMT)

Hi. I wrote to you in the mail.

berndp

Member
Posts: 9

Re: Comprehensive list of PID operators and functions
on: January 9, 2020 (GMT)

Hi All,
Can Torque do logical functions? (If…., then…., else)
Are there plans to add this if not already there?

I want to indicate the current selected gear of my manual box, based on rpm/speed…., and just using “lookup” etc does not work quite nice.

Regards

Brackenfell,
Western Cape
RSA

Capp777

Member
Posts: 2994

Re: Comprehensive list of PID operators and functions
on: January 9, 2020 (GMT)

“Closest()” was my preferred way…

https://torque-bhp.com/forums/?wpforumaction=viewtopic&t=8721.1

berndp

Member
Posts: 9

Re: Comprehensive list of PID operators and functions
on: January 9, 2020 (GMT)

Quote from Capp777 on January 9, 2020

“Closest()” was my preferred way…

https://torque-bhp.com/forums/?wpforumaction=viewtopic&t=8721.1

With the lookup() the selected gear fluctuates, especially during acceleration…..

I’ll try the “closest()” option.

Having a dual range box, the lower gear ratios are very close to each other…….

Brackenfell,
Western Cape
RSA

santa2003007

Member
Posts: 30

Re: Comprehensive list of PID operators and functions
on: February 4, 2020 (GMT)

Hello.
Tell me how to do it?
It is necessary that Pid [1F] participated in the formula, through the TOT () function, it is not possible to realize the correctness of the count.
It is necessary to make a calculation of motor hours of the car relative to Pid [1F].

santa2003007

Member
Posts: 30

Re: Comprehensive list of PID operators and functions
on: September 28, 2020 (GMT)

Hi Ian Hawkins.
Yes, I also confirm that saving parameters in the program does not work.
After restarting the program, the value may be zero.
1. Ian Hawkins add a separate function for saving a parameter and writing values to the profile.
People have been waiting for it for 9 months!
2. you Need a cumulative function in which the parameter was accumulated and the value in it was not reset.
3. Also, another very necessary function: IF, THEN, OTHERWISE.

WHAT’S THE PROBLEM?
WHY DON’T YOU ANSWER PEOPLE’S MESSAGES!

Fofaol

Member
Posts: 1

Re: Comprehensive list of PID operators and functions
on: February 17, 2022 (GMT)

Quote from DANGER1979 on April 29, 2016
The variable “tank Volume” – in TorqueScan not available.
I want to use this variable in the formula customs PIDs.

Me too…

Vasilich

Member
Posts: 223

Re: Comprehensive list of PID operators and functions
on: March 14, 2022 (GMT)

Is it possible to write some values in formulas in hex? i have tried $_7F, 0x7F, 7Fh – equation parser moans that this “variable” isn’t available.
It is useful when there are some bitfiedls in the answer and you want to build a formula for it using some “&” operators.

wosk

Member
Posts: 11

Re: Comprehensive list of PID operators and functions
on: June 17, 2022 (GMT)

I’ve found one more issue with SIGNED32
https://disk.yandex.ru/i/YpRg3AGvubM4HQ

————————-
Chevrolet Aveo T250 with ECU Sirius D42
Chevrolet Aveo T300

Actual car: Nissan Leaf AZE0 X 2015

HoTsHoT

Member
Posts: 12

Re: Comprehensive list of PID operators and functions
on: March 26, 2023 (GMT)

Is it possible to do round up/down on the final equation values?

djlilis

Member
Posts: 1

Re: Comprehensive list of PID operators and functions
on: December 21, 2023 (GMT)

Hi, I scanned my 2013 Honda Civic for Honda specific pids and found several and want to experiment with them and try to figure out what they do. I’ve run into a weird problem though. Torque shows the data coming in fine when I test the custom pid .. it’s there in the raw data, but variables over K seem to only return -1, and N10+ do not return the expected values either. I haven’t seen this so I’m thinking maybe a config error on my part but the data is being read. Does anyone have any ideas?

gra

Member
Posts: 17

Re: Comprehensive list of PID operators and functions
on: March 26, 2024 (GMT)

Specific pids for Vag?

Pages: 1 2 3 4 5 [6]

WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.067 seconds.

Forums

Forums

Guest