Forums

Guest
Welcome Guest, posting in this forum require registration. Username Password Remember me

Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » Vauxhall (Opel GM) DPF PID

Pages: 1 2 3 4 5 6 7 8 9 [10] 11 12 13 14 15 16 17 18 19 20

Author	Topic: Vauxhall (Opel GM) DPF PID

castas

Member
Posts: 16

Re: Vauxhall (Opel GM) DPF PID
on: March 22, 2018 (GMT)

Thank you very much cintakc

How can I know what each one corresponds to?

Mainly I want to know the km since the last regeneration and the % saturation of the filter

castas

Member
Posts: 16

Re: Vauxhall (Opel GM) DPF PID
on: March 22, 2018 (GMT)

Quote from cintakc on March 21, 2018
PIDs for DPF Mokka
2220F2, 2220F4, 2220F5, 2220F6, 22131F

I have verified that the 5 PIDs give me an answer but I don’t know how to configure them

cintakc

Member
Posts: 1663

Re: Vauxhall (Opel GM) DPF PID
on: March 22, 2018 (GMT)

put here what answers the ECU gives on these PIDs, I’ll look at formulas

castas

Member
Posts: 16

Re: Vauxhall (Opel GM) DPF PID
on: March 22, 2018 (GMT)

The values are read in Hader 7E0

The values of A and B in HEX

2220F2
Response 6220F200 A= 00 B= -1

2220F4
Response 6220F400 A= 00 B= -1

2220F5
Response 6220F509 A= 09 B= -1

2220F6
Response 6220F601 A= 01 B= -1

22131F
Response 62131F0000 A= 00 B= 0

gra

Member
Posts: 17

Re: Vauxhall (Opel GM) DPF PID
on: March 23, 2018 (GMT)

Cintakc, on z17dtr, using aa0318 gives me the same response…a,b,c and e, same values as many other pids I try.
A is soot, E is number of succesfull nr of regen, and C maybe diff pressure…

Example of responses, (hard to get on “Test” mode), most of them i can get only in dashboard, not in pid lists (all remain black there…)

result of equation:41.34
start diagnostic response:
OK
OK
OK

Command:
aa0329

Response
5E8829351706013B0000
5E8829351706013B0000
5E8829351706013B0000
5E8829351706013B0000
5E8829351706013B0000
5E88293517351606013B0000
5E8829351706013B0000

OR, (with 1 hz refresh rate), the line 6 became shorter:
5E882935166013B0000

I think i get same answers for many pids due to atcra start and stop commands, without them i get NO DATA. with start command “20” i get no data

Do you have pids for dpf (or cat) temperature, ash level, oil dillution?

Thank you!

gra

Member
Posts: 17

Re: Vauxhall (Opel GM) DPF PID
on: March 23, 2018 (GMT)

response 41,34 was a*0.78, so “A” was 53…

cintakc

Member
Posts: 1663

Re: Vauxhall (Opel GM) DPF PID
on: March 23, 2018 (GMT)

castas, try this for Opel Mokka 1.7 CDTI

Average Distance Between DPF Regenerations
2220F7		A*256+B			km
Average DPF Inlet Temperature During Regeneration
2220F8		(A*256+B)*0.1-40	        degree C
Average DPF Regeneration Duration
2220F9		A*8			S
Calculated DPF Flow
2220F5		A*0.01			Kpa
Distance Since Last DPF
223039		A*256+B			km
DPF Differential Pressure
2220F4		Signed(A)		Kpa
DPF Regeneration
2220F6		Lookup(A::0='Not required':1='Required')
DPF Regeneration Status
2220F2		Lookup(A::0='Not required':1='Stage 1':2='Stage 2':3='Stage 3':4='Stage 4')	
DPF Differential Pressure Sensor
222035		A*5.0/255		Volt

cintakc

Member
Posts: 1663

Re: Vauxhall (Opel GM) DPF PID
on: March 23, 2018 (GMT)

gra
give me answers to such requests in the terminal (ElmBasic or Elm327Chat)
atz
ath1
atsp6
atsh7e0
20
1a97
1a9a

and
atz
ath1
atsp6
atsh7e0
atcra5e8
20
aa0329

castas

Member
Posts: 16

Re: Vauxhall (Opel GM) DPF PID
on: March 23, 2018 (GMT)

First of all, thank you very much cintakc for your quick answers.

Below I attach the results of the test that you requested. I have not configured Header or min and max values.

I would also miss the PID of DPF Soot Accumulation

Average Distance Between DPF Regenerations
2220F7 A*256+B km
Result for equation: 1045.0 Response= 6220F70415 A=4 B=21

Average DPF Inlet Temperature During Regeneration
2220F8 (A*256+B)*0.1-40 degree C
Result for equation: 625.8 Response= 6220F81A02 A=26 B=2

Average DPF Regeneration Duration
2220F9 A*8 S
Result for equation: 448.0 Response= 6220F938 A=56

Calculated DPF Flow
2220F5 A*0.01 Kpa
Result for equation: 0.09 Response= 6220F509 A=9

Distance Since Last DPF
223039 A*256+B km
Result for equation: 1120.0 Response= 6230390460 A=4 B=96

DPF Differential Pressure
2220F4 Signed(A) Kpa
Result for equation: 0.0 Response= 6220F 400 A=0

DPF Regeneration
2220F6 Lookup(A::0=’Not required’:1=’Required’)
Result for equation: 1.0 Response= 6220F601 A=1

DPF Regeneration Status
2220F2 Lookup(A::0=’Not required’:1=’Stage 1′:2=’Stage 2′:3=’Stage 3′:4=’Stage 4′)
Result for equation: 0.0 Response= 6220F200 A=0

DPF Differential Pressure Sensor
222035 A*5.0/255 Volt
Result for equation: 5.0 Response= 622035FF A=255

cintakc

Member
Posts: 1663

Re: Vauxhall (Opel GM) DPF PID
on: March 23, 2018 (GMT)

castas,
and how do you think the values are real?
are the values with the engine running?

Response= 6220F70415 A=4 B=21

do not need to paint A = B =
just write the answer Response= 6220F70415

castas

Member
Posts: 16

Re: Vauxhall (Opel GM) DPF PID
on: March 23, 2018 (GMT)

I have understood the Values A and B.

The tests have been made with the engine running

Regarding the values, I believe that the last regeneration made it less than 1000Km ago.

However the PID 22039 with the equation A * 256 + B I have it configured a week ago and has been increasing from 720 km without any regeneration has occurred since then

However, if I had the% of accumulation I could know, more or less, how much is missing for the next regeneration

The Average DPF Regeneration Duration I think it’s fine.
Whenever I see that the car made a regeneration when I returned from work I made the same route at 80Km / h in 3rd gear and lasted about 7 or 8 minutes

castas

Member
Posts: 16

Re: Vauxhall (Opel GM) DPF PID
on: March 28, 2018 (GMT)

As much as I search and research, I can not find the PID to know the saturation percentage of the DPF in Opel 1.7 engines

cintakc

Member
Posts: 1663

Re: Vauxhall (Opel GM) DPF PID
on: March 28, 2018 (GMT)

give me answers to requests 1a90, 1a9a

castas

Member
Posts: 16

Re: Vauxhall (Opel GM) DPF PID
on: March 29, 2018 (GMT)

Quote from cintakc on March 28, 2018
give me answers to requests 1a90, 1a9a

1a90
Response
013
0:5A9057304C4A
1:4437454C394542
2:363531353435AA

1a9a
Response
5A9A2B06

cintakc

Member
Posts: 1663

Re: Vauxhall (Opel GM) DPF PID
on: March 29, 2018 (GMT)

I’ll substitute these data, maybe I’ll need answers, I’ll write

castas

Member
Posts: 16

Re: Vauxhall (Opel GM) DPF PID
on: March 29, 2018 (GMT)

Quote from cintakc on March 29, 2018
I’ll substitute these data, maybe I’ll need answers, I’ll write

First, thanks for your quick response

I have made a 30 km route to see if this change the response about pid 1a90 and 1a9a and there have been no changes

cintakc

Member
Posts: 1663

Re: Vauxhall (Opel GM) DPF PID
on: March 29, 2018 (GMT)

these are PIDs for auto identification and ECU engine block
I need them for the scanner

cintakc

Member
Posts: 1663

Re: Vauxhall (Opel GM) DPF PID
on: March 29, 2018 (GMT)

I looked exactly on your engine, there are more than 200 parameters, but the parameter percentage of saturation DPF in engines Opel 1.7 – no
this is all that is, maybe this gradation is 4 steps, there is 100% divided by 4
DPF Regeneration Status
2220F2 Lookup(A::0=’Not required’:1=’Stage 1′:2=’Stage 2′:3=’Stage 3′:4=’Stage 4′)
incidentally, here are a few more PIDs

Fuel volume in tank
22132A		(A*256+B)*0.015625			L	
Desired boost pressure
22328A		(A*256+B)*0.01				kPa
Fuel rail pressure request
22308A		(A*256+B)*0.01				MPa

castas

Member
Posts: 16

Re: Vauxhall (Opel GM) DPF PID
on: March 29, 2018 (GMT)

Okay. I will test this afternoon and indicate the result.

With the time that it made the last regeneration it should be in 3 or 4

castas

Member
Posts: 16

Re: Vauxhall (Opel GM) DPF PID
on: March 30, 2018 (GMT)

I can not get it to do a regeneration in order to control it.

Today I made about 250 km. The PID 223039 already marks 1470 km since last regeneration

The PID 2220F2 always marks ‘Not required’

Pages: 1 2 3 4 5 6 7 8 9 [10] 11 12 13 14 15 16 17 18 19 20

WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.061 seconds.

Forums

Forums

Guest