Forums

Guest
Welcome Guest, posting in this forum require registration. Username Password Remember me

Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » Vauxhall (Opel GM) DPF PID

Pages: 1 2 3 4 5 6 7 8 9 10 11 [12] 13 14 15 16 17 18 19 20

Author	Topic: Vauxhall (Opel GM) DPF PID

Ashaman

Member
Posts: 16

Re: Vauxhall (Opel GM) DPF PID
on: May 11, 2018 (GMT)

cintakc I just talked with my friend and he said that when compared to opcom the values ur formulas give seem to be the same so they should be ok.
On the other hand I am using on my Astra J 1.6 cdti 136ps the
following PID : “2220fa DPF Regeneration Status DPF Status 0 255 On / Off {A: 0} 7E0” but today I noticed that DPF was regenerating but the whole 10-15 mins it happened the Regen Status was at Off .
Anything we can do?
Thanks in advance once more .

cintakc

Member
Posts: 1663

Re: Vauxhall (Opel GM) DPF PID
on: May 11, 2018 (GMT)

try this

"OPEL Astra-K DPF Regeneration Status","DPF dif.stat","2220FA","1-{A:0}","0","1","off/on","7E0"

Ashaman

Member
Posts: 16

Re: Vauxhall (Opel GM) DPF PID
on: May 11, 2018 (GMT)

Ok I will set it now but it will take some days to test it since it just finished one and (I hope) next one will not start for at least 400+ km.
Thnx once more my friend

cintakc

Member
Posts: 1663

Re: Vauxhall (Opel GM) DPF PID
on: May 11, 2018 (GMT)

this PID 2220FA for OPEL Astra-K

edomali

Member
Posts: 2

Re: Vauxhall (Opel GM) DPF PID
on: May 11, 2018 (GMT)

Quote from cintakc on May 10, 2018
PIDs DPF for Astra-J 1.3 MY2012

"Name","ShortName","ModeAndPID","Equation","Min Value","Max Value","Units","Header"
"Astra-J DPF Differential Pressure Sensor","Diff.pres.sen","223035","A*5/255","0","5","V","7E0"
"Astra-J DPF Differential Pressure","Diff. press.","223273","A","0","255","kPa","7E0"
"Astra-J DPF Soot Accumulation","DPF Soot","223275","A","0","100","%","7E0"
"Astra-J Distance after last DPF replacement","Dis.last DPF repl","223276","A*65536+B*256+C","0","100000","km","7E0"
"Astra-J Distance Since Last DPF Regeneration","Dist.DPF reg","223277","A*65536+B*256+C","0","100000","km","7E0"
"Astra-J Regeneration state DPF","DPF state","223274","A*100/255","0","100","%","7E0"
"Astra-J Average DPF Inlet Temperature During Regeneration","DPF Inlet temp","223279","A*5-40","-40","1235","degree C","7E0"
"Astra-J Average duration of regeneration DPF","Aver.dur.DPF","22327A","A*256+B","0","65535","S","7E0"
"Astra-J Counter interrupted regenerations DPF","Coun.inter.DPF","223047","A*256+B","0","65535","counts","7E0"
"Astra-J Average distance Between DPF Regeneration","Av.dist.btwn DPF","223278","A*65536+B*256+C","0","100000","km","7E0"

Hi to all,i have Opel Meriva B ,year 2010,engine1.3CDTI A13DTE 95HP.
Would these parameters be fine for me wehicle?
Thanks in advance

cintakc

Member
Posts: 1663

Re: Vauxhall (Opel GM) DPF PID
on: May 12, 2018 (GMT)

I think not suitable

edomali

Member
Posts: 2

Re: Vauxhall (Opel GM) DPF PID
on: May 12, 2018 (GMT)

? do anybody maybe know where can find pid’s for my meriva?

Ashaman

Member
Posts: 16

Re: Vauxhall (Opel GM) DPF PID
on: May 12, 2018 (GMT)

Quote from cintakc on May 11, 2018
this PID 2220FA for OPEL Astra-K

I know but most of the others for Astra-K work for Astra-J as well since it’s the same engine.
With the new equation (1-{A:0}) I put though it shows as always On for the Regeneration Status so I think I will take the “1-” part of the equation out and see how it goes.
Thnx once more my friend

cintakc

Member
Posts: 1663

Re: Vauxhall (Opel GM) DPF PID
on: May 12, 2018 (GMT)

Give answer in hexadecimal on the this PID
it is possible that this PID is not supported on your car

Ashaman

Member
Posts: 16

Re: Vauxhall (Opel GM) DPF PID
on: May 14, 2018 (GMT)

Quote from cintakc on May 12, 2018
Give answer in hexadecimal on the this PID
it is possible that this PID is not supported on your car

Hello again.
Sorry for the delay but I had not tried it till now.
The result is 6220FA00
Thnx once more cintakc

cintakc

Member
Posts: 1663

Re: Vauxhall (Opel GM) DPF PID
on: May 14, 2018 (GMT)

PID is supported on your car, write the change log of this PID
if you use the formula 1-{A:0}, then according to the value you specify, it should show “ON”
if you use the formula {A:0}, then according to the value you specify, it should show “OFF”

Ashaman

Member
Posts: 16

Re: Vauxhall (Opel GM) DPF PID
on: May 14, 2018 (GMT)

Quote from cintakc on May 14, 2018
PID is supported on your car, write the change log of this PID
if you use the formula 1-{A:0}, then according to the value you specify, it should show “ON”
if you use the formula {A:0}, then according to the value you specify, it should show “OFF”

Indeed it shows on now with the formula being 1-{A:0} so it should be showing off if I leave it as it was before {A:0}. Trouble is that the previous time while it was like this {A:0} when the regeneration started and during the whole time it was working it still showed Off. To be accurate though I had the formula as {A:0} but the max value instead of 1 was 255. So it could have been.
I will set it again as {A:0} and wait till next regen to see if it works.
Thnx again my friend.

ltmpx

Member
Posts: 18

Re: Vauxhall (Opel GM) DPF PID
on: May 20, 2018 (GMT)

Hello,

First of all, English it is not my native language so sorry for my errors.

Second, I had read all the posts, and I had tried all the pids with the hope that I will have at least one dpf sensor working. Nothing.

I have a Opel Zafira B, from 2011, 1,7 dci, diesel.

Do I have to provide the engine code, or the chasis code? I did initiate the full scan but afer 2 hours it was not done.

Do I have any of the dpf related sensors?

Can somebody help me?

Thank you in advance.

cintakc

Member
Posts: 1663

Re: Vauxhall (Opel GM) DPF PID
on: May 21, 2018 (GMT)

ltmpx
try in the terminal this commands, write response
atz
ath1
atsp6
atsh7e0
20
3e
atcra5e8
aa0329
aa0118

ltmpx

Member
Posts: 18

Re: Vauxhall (Opel GM) DPF PID
on: May 21, 2018 (GMT)

OK , sir, I will do it asap, I am on the highway now.

ltmpx

Member
Posts: 18

Re: Vauxhall (Opel GM) DPF PID
on: May 21, 2018 (GMT)

Quote from cintakc on May 21, 2018
ltmpx
try in the terminal this commands, write response
atz
ath1
atsp6
atsh7e0
20
3e
atcra5e8
aa0329
aa0118

Those are the responses from the terminal

atz > ELM 327v1.5
ath1 > ATH1 OK
atsp6 > OK
atsh7e0 > OK
20 > 60
3e > 7E
atcra5e8 > OK
aa0329 > 9:621405003A0000
aa0118 > NODATA

Thank you.

cintakc

Member
Posts: 1663

Re: Vauxhall (Opel GM) DPF PID
on: May 21, 2018 (GMT)

or you did not specify a complete response to the command aa0329, or your adapter did not execute the ath1 command

for example, on the first page of this topic
>> atcra5e8
OK
>> aa0118
5E8 18 22 32 5D 00 3F 00
you:
aa0329 > 9:621405003A0000

I think for your engine fit the PIDs – aa03xx

Regenerations Sincle DPF Exchange (DPF)
aa0329		D*256+E			-  00h*256+3Ah=58

Load state particle filter
aa0329		A*200/255		%  62h*200/255=76.8 %

Particle filter differential pressure
aa0329		C-5			kPa  05h-5=0 kPa  

Particle filter differential pressure sensor (volt)
aa0329		B*5/255			V  14h*5/255=0.37 v

ltmpx

Member
Posts: 18

Re: Vauxhall (Opel GM) DPF PID
on: May 21, 2018 (GMT)

Thank you Sir, for your reply.

I did enter the commands as you instructed me; I will do it again. Also, I will try the custom pid’s that you gave, and then, I will report back.

Thank you.

ltmpx

Member
Posts: 18

Re: Vauxhall (Opel GM) DPF PID
on: May 21, 2018 (GMT)

Thank you cintakc, I had done this:

atz > ELM 327v1.5
ath1 > ATH1 OK
atsp6 > OK
atsh7e0 > OK
20 > 60
3e > 7E
atcra5e8 > OK
aa0329 > 9:621405003A0000
aa0118 > NODATA

atz > ELM 327v1.5
ath1 > ATH1 OK
atsp6 > OK
atsh7e0 > OK
20 > 60
3e > 7E
atcra5e8 > OK
aa0118 > NODATA

atz > ELM 327v1.5
ath1 > ATH1 OK
atsp6 > OK
atsh7e0 > OK
20 > 60
3e > 7E
atcra5e8 > OK
aa0329 > 9:621405003A0000

Then I create the custom pids, based on the data from you, and did nit worked; I also pushed the test button from pids =, and received the no data message.

What I am doing wrong? I will try to upload screenshots from console, and from custom pids.

Thank you so much Sir for your time and patience

Edit 1

I can not upload screenshots, but I upload them on this google drive link https://drive.google.com/drive/folders/1IughoOtUEK0SWvw6dcZZYQh1UQybJ6TW?usp=sharing

cintakc

Member
Posts: 1663

Re: Vauxhall (Opel GM) DPF PID
on: May 22, 2018 (GMT)

I looked, you are connected to the ECS using a standard protocol,
To connect to the factory protocol, you need to configure the auto profile, where to register the initialization string
atsp6\nath1\natsh7e0\natcra5e8

try in the terminal ElmBasic send commands as in the screenshot, what you get the answer
https://yadi.sk/i/Fb8qYwfy3WLKFU

https://yadi.sk/i/WPXxXwHz3WLL29

Pages: 1 2 3 4 5 6 7 8 9 10 11 [12] 13 14 15 16 17 18 19 20

WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.07 seconds.

Forums

Forums

Guest