Torque

Forums

Forums

Guest  

Show or hide header
Welcome Guest, posting in this forum require registration.

Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » bug in version 1.12.96

Pages: [1]
Author Topic: bug in version 1.12.96
terry274
Member
Posts: 3
Post bug in version 1.12.96
on: March 4, 2022 (GMT)

Version 1.12.96 has caused PID 222201 (transmission temperature) to no longer work. This PID did work on an older version of Torque Pro.

The error is: Result for equation: [No Response]

If any more information is need to correct this please let me know.

Thanks, Terry
piemmm
Administrator
Posts: 6629
Post Re: bug in version 1.12.96
on: March 4, 2022 (GMT)

Hi!

Thanks – If you could do the following:

* Start torque, go to the special settings and tick ‘enable debugging’

* Quit and restart torque, then go to the pid information screenstraight away and test the PID once it has connected to the ECU for about 30 seconds

* Then without quitting, go to the ‘realtime information screen, press menu->send debugging information, and type your forum name in the box that pops up (so i can locate the correct debug)

Let me know you’ve sent it here, and I’ll be able to dig a bit deeper and see what’s up
piemmm
Administrator
Posts: 6629
Post Re: bug in version 1.12.96
on: March 4, 2022 (GMT)

Hi!

Found the issue – no debug needed (though it would be incredibly useful as 29bit debugs are useful)

I’ll get the fix into the .97 update asap

(You /should/ (i have not tested this) be able to workaround this by using the shorter header version iirc most adapters allow you to use)
piemmm
Administrator
Posts: 6629
Post Re: bug in version 1.12.96
on: March 4, 2022 (GMT)

Hi!

The update has been posted to beta – if you can join the beta and let me know how you get on that’d be great! Apologies for the inconvenience!
terry274
Member
Posts: 3
Post Re: bug in version 1.12.96
on: March 5, 2022 (GMT)

Thanks! I have enabled debugging and will send the logs later.
How do I get the beta app? I looked on google play and did not find it. I will search this forum for more information.
Again, thank you for your fast response.
Terry
terry274
Member
Posts: 3
Post Re: bug in version 1.12.96
on: March 5, 2022 (GMT)

Piemmm, I sent the log file. I also changed the OBD header to Auto and the PID then worked correctly.

So, the issue is fixed and again I thank you for your prompt response!
Terry
Pages: [1]
WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.023 seconds.

  Follow me on twitter