Forums

Guest
Welcome Guest, posting in this forum require registration. Username Password Remember me

Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » Single pid stopped working after months of working fine

Pages: [1]

Author	Topic: Single pid stopped working after months of working fine

davidtm

Member
Posts: 6

Single pid stopped working after months of working fine
on: July 1, 2021 (GMT)

I am currently running Torque Pro in my 2019 Kia Niro EV, using pids from jejusoul on GitHub. They were working just fine for over a year. Now, my SOC_Display pid is displaying -0.5% after initially displaying the correct SOC for about 1-2 sec. I am running numerous other pids, all of which have been functioning just fine since the beginning. I have removed and re-installed that pid, plus another that is named differently but the same.

Any ideas on what happened? Did this particular pid get corrupted somehow?

TIA

Capp777

Member
Posts: 2997

Re: Single pid stopped working after months of working fine
on: July 1, 2021 (GMT)

Have you tested the raw hex response to
see if data looks normal?

Have you tested using a different adapter?

davidtm

Member
Posts: 6

Re: Single pid stopped working after months of working fine
on: July 1, 2021 (GMT)

1. No. Not sure how to do that.
2. No, have just one OBD dongle, but all the other pids work fine, which leads me to believe it’s OK

Capp777

Member
Posts: 2997

Re: Single pid stopped working after months of working fine
on: July 1, 2021 (GMT)

If it is a custom pid, use the pid editor to
edit/test for the raw hex response.

You should be able to figure out the
vehicles response for the pid in question
if the response is normal.

I have read on previous threads where
some pids work and others don’t on some
faulty adapters.

Since this pid used to work I suspect a
failing adapter or a corrupt field in the
pid definition.

Pages: [1]

WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.015 seconds.

Forums

Forums

Guest