Hello,

I was trying to use Torque intents in Tasker to get notified when PID alarm is triggered. It looks like only intent which actually works is the one for closing the Trorque application:

org.prowl.torque.REQUEST_TORQUE_QUIT    (Properly shuts down Torque and related services - this must be sent as a broadcast type intent)

But the rest of documented intents like:

org.prowl.torque.OBD_CONNECTED          (Sent when Torque connects to an OBD2 adapter)
org.prowl.torque.OBD_DISCONNECTED       (Sent when Torque is disconnected from the OBD2 adapter)
org.prowl.torque.APP_LAUNCHED           (Sent when Torque starts up)
org.prowl.torque.APP_QUITTING           (Sent when Torque is about to quit)

or the one for alarm:

org.prowl.torque.ALARM_TRIGGERED  (Sent when an alarm PID is triggered)

[intent bundle contents]
  String - "ALARM_NAME"  - The alarm name
  String - "ALARM_TYPE" - The type of alarm trigger threshold ("MINIMUM" or "MAXIMUM")
  double - "CURRENT_VALUE" - The current value of the PID/equation the alarm is referencing
  double - "TRIGGER_VALUE" - The trigger value for the alarm (below/above this will trigger the alarm based on the alarm type)
  String - "UNIT" - The unit that the PID uses

isn’t working anymore. It doesn’t matter what I tried in Tasker, the result was that there is no intent received. Does anybody has a success for using Torque intents in Tasker, other than the one for closing Torque app?