Is it possible to set up custom PID that way torque would log raw data?

for example. PID 21C98001 with a multiline response

0:61FF03840000
1:FFFFFFFFFF2400
2:FA00F90038FFFF
3:FFFFFFFFFFFFFF
4:FFFFFF4B01FF01
5:00870082008600
6:7DFFFFFFFF5A

should log those 6 in a log file as they are and send them via http.

Any suggestion?

Thank you, Alex

can use terminal

Quote from Capp777 on January 10, 2020
To my knowledge Torque’s data logging
does not save the whole raw hex response.

If your hex response is consistent in length
maybe you could create enough pids using int32()
to capture segments in blocks of four bytes
then reconstructing from the integer values
on the other end?

pid1 int32(R0:R1:R2:R3)
pid2 int32(R4:R5:R6:R7)
etc.

Thats what I would like. I set up my own server for collecting data from torque and also other apps and represent data via Grafana.

I bought Torque pro as it is by far best app but can’t get all data from my Citroen C5. So I loged communication that FAP do with ELM and found that all data is received via 5 or 6 PIDS with multiline response.

Logging them into database gives me options to play with data and try to find out what is what…

Please see all five PIDs that are interesting for me with full responses from ELM. For a citroen there are all informations inside those PIDs. From the temperatures to the all the rest..

1,524 Master 11 21C98001.
1,525
1,526 Slave 11 02
1,527 Slave 11 F.0:6
1,528 Slave 11 1FF0
1,529
1,530 Slave 11 3
1,531 Slave 11 7F0000.1:FFFFFFFFFF2200.2:F900F70054FFFF.3:FFFFFFFFFFFFFF.4:FFFFFF3601FF01.5:0091008B008F00.6:87FFFFFFFF5A..>
1,532 Master 11 21CA8001.
1,533
1,534 Slave 11 02
1,535 Slave 11 E
1,536 Slave 11 .0:6
1,537
1,538 Slave 11 1FF03
1,539 Slave 11 810000.1:353403E103D903.2:E16464FFFFFFFF.3:FFFF00000384FF.4:FFFFFFFFFFFFFF.5:3203E864FF01B8.6:021EFFFF00..>
1,540 Master 11 21CC8001.
1,541
1,542 Slave 11 01
1,543 Slave 11 E
1,544 Slave 11 .0:6
1,545
1,546 Slave 11 1FF03
1,547 Slave 11 810000.1:019000C80000FE.2:FEFF33FF901388.3:1388FFFFFF01FF.4:01FF00..>
1,548 Master 11 21CD8001.
1,549
1,550 Slave 11 011
1,551 Slave 11 .0:61
1,552 Slave 11 FF03
1,553 Slave 11 8
1,554 Slave 11 4003D.1:000000FF020026.2:00461383..>
1,555
1,556 Master 11 21CB8001.
1,557
1,558 Slave 11 029
1,559 Slave 11 .0:61
1,560 Slave 11 FF03
1,561 Slave 11 8
1,562 Slave 11 60000.1:FFFFFFFFFFFFFF.2:09030D40000709.3:2409230000FFFF.4:00620013880258.5:00640186A0000F..>

check images of the data presented on my server:

https://drive.google.com/open?id=1dZRoqIZzPbTkhtkvY4d2XuVdelwAeuwd

https://drive.google.com/open?id=16ic23Bxjg_BVgKTsT-0MKEIw8aVXwRza

https://drive.google.com/open?id=1t7oPnQFrMPYKB2rMvGadV16-ElOqFPcB

https://drive.google.com/open?id=1p0nMPNvRFQZvEKL4p_F1K2xAbCcY8Syl

https://drive.google.com/open?id=1ZB8_Ihm0nZQG99bDMbfspZGRsObecEcO

https://drive.google.com/open?id=1CQuVccFd-Cr1wyP98fs7MM7fizJ_56pL

detail of regeneration:
https://drive.google.com/open?id=16zz0D25Y8QXmao5-ZWAvcikjfrGG43Df

br Alex

All data is logged from FAPpro application and I managed to set up torque to receive data just don’t yet know how to log them and how to interprate it :).