Torque

Forums

Forums

Guest  

Show or hide header
Welcome Guest, posting in this forum require registration.

Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » PID Scan Duration?

Pages: [1]
Author Topic: PID Scan Duration?
Pedro123
Member
Posts: 14
Post PID Scan Duration?
on: March 3, 2019 (GMT)

Attempted to use Torque Scan to get PIDs for my 2017 Hyundai. Set the (long) scan into motion and it just kept churning and churning, but some adding of PIDs to the will work list in the background.

However I let this scan continue (while driving) for an hour and a half and it was still “discovering” before I had to stop it, how long does this last for and is there a better way to add these PIDs? I got to about PID 22C4a

Because I stopped the scan before full completion does that mean the PIDs I did got were not added to the working PID list (green background)?

Will I have to start all over again?

Thanks

Stone Isthisticky
Member
Posts: 51
Post Re: PID Scan Duration?
on: January 11, 2021 (GMT)

I’m asking the same question…
It would be very nice to get the possibility to restart at the same point…

I have a cheap ELM327 adapter, and the scan rate seems to be 1 adress per second…

If the scan is from 220000 to 22FFFF It means that the full scan would took 18 hours (in the supposition that there is nothing after 22FFFF…). (knowing that if someone call me… the scan stop ! ^^)

I just bought a new adapter, in wifi this time.
Do you think that the scan rate will be higher ?
F-150Torqued
Member
Posts: 437
Post Re: PID Scan Duration?
on: January 11, 2021 (GMT)

I left my 2004 F150 idling and ran a FULL scan from 0000 to FFFF (Back when Torque Scan worked correctly —- would actually let you ‘send’ / ‘Share’ the result via email).

It took 7 hours to scan — and a while to send the file.

As far as I know, present version (at least MINE) will scan, but when you stop it and try to send – looses everything and will not send the file. Check that out before doing a full scan.
Stone Isthisticky
Member
Posts: 51
Post Re: PID Scan Duration?
on: January 12, 2021 (GMT)

7 hours at idling ?! o_O
Ouch !

I hope the Wifi will be faster !
Thank you for your advice ! 😉
cintakc
Member
Posts: 1663
Post Re: PID Scan Duration?
on: January 12, 2021 (GMT)

to search for PIDs it will be easier and faster to use the terminal
Stone Isthisticky
Member
Posts: 51
Post Re: PID Scan Duration?
on: January 12, 2021 (GMT)

Hello cintakc,

What do you mean by “Terminal” ?

Is it a special device ?
cintakc
Member
Posts: 1663
Post Re: PID Scan Duration?
on: January 13, 2021 (GMT)

free program from the play market terminal elm327chat
in it you can specify a list of PIDs for scanning in the form of a text file
usually create a file with a list of commands from 220000 to 2200FF, by editing the file with commands, you can scan any range you need
here is an example file with commands
https://yadi.sk/d/_qrgxk8mA7rP8g
Stone Isthisticky
Member
Posts: 51
Post Re: PID Scan Duration?
on: January 14, 2021 (GMT)

oh…. I see.

Many thanks, I think it would be more convenient, I could splite the scan in little 1 hour sessions !
I took the app from “MAXdevelopers” on playstore.

I’ll try this !

cintakc
Member
Posts: 1663
Post Re: PID Scan Duration?
on: January 14, 2021 (GMT)

yes, at any free time you can scan a number of PIDs, then, when needed, continue searching in another range
Stone Isthisticky
Member
Posts: 51
Post Re: PID Scan Duration?
on: January 17, 2021 (GMT)

It doesn’t work with my modus operandi. :-/

On the app “ELM327 OBD Terminal” when I try a PID than I sent, there is a error in the response (even if I try a PID on which one I’m sure that it must have a response…

On an other App, I can’t event test an adress.

Cintakc, which app do you use ?

And an other question : I know that my car get a response on a precise PID (example : AA0118 (for DPF infos)), but how (with a scan from 220000 to 22FFFF) can I have a response on this PID ?

Thanks
cintakc
Member
Posts: 1663
Post Re: PID Scan Duration?
on: January 17, 2021 (GMT)

free program from the play market terminal elm327chat
if your engine ECU exactly answers the request aa0118, then write such requests to the file for the terminal

atz
atsp6
atsh7e0
20
atcra5e8
aa0101
aa0102
aa0103
...
aa01ff
Stone Isthisticky
Member
Posts: 51
Post Re: PID Scan Duration?
on: January 22, 2021 (GMT)

Hi cintakc,

I finally succeeded to do the tests, first from 220000 to 2201FF,
then from AA0000 to AA01FF.

It’s clearly faster ! thanks for the advice !

Can I ask you something about my results?
I asked here on the second message : https://torque-bhp.com/forums/?wpforumaction=viewtopic&t=15442.00

Thanks.

cintakc
Member
Posts: 1663
Post Re: PID Scan Duration?
on: January 23, 2021 (GMT)

by your link you used atcra7e8, but you need atcra5e8

atz
atsp6
atsh7e0
20
atcra5e8
aa0101
aa0102
aa0103
…
aa01ff
Pages: [1]
WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.039 seconds.

  Follow me on twitter