Thank you. Again good. Only need to solve the external memory and perfect.

My issues:

Layout is better. Buttons could be bigger though.
1.Data and video are not in sync. Data (speed) is about 2s delayed. (fixed by repairing)
2.When playing videos map is visible even though not checked
3.if my screen turns off recording stops (why?)

Galaxy s2, android 4.04

Torque issues
1. Crashes every time i open program (bluetooth share has stopped…)

Solved the Problem!

I first thought its a problem with Windows 7 and so used my laptop with Windows XP. I had to deactivate the anti virus programm so the Encoder would find my Phone.

That actually didn´t solve my Problem. Still no Videos in the list! The actual Problem was, that I installed a new Version of Torque on my phone but copied the old “torqueRecorder” folder back so I wouldn´t lose my Videos.

What I did to Encode the old Videos anyway:

– Deleted the whole “torqueRecorder” folder. (Do a backup before!!)
– Recorded a short video with Torque Recorder so the app will create the folder and all Files needed.
– Copy the old backed up files (pidlog.csv , video.mp4 , video.srt ) from the old folder to the new one created by Torque Recorder. In my case the Folder name was “1346246059265”.
Keep the file “dashboard.dat” in that folder, and also keep the “trackrecorder.dat” file in the root Directory!!

– Open the Encoder and Encode your videos.

If you have more than one old Video to Encode, you DONT have to Record more than one useless Video. Just duplicate the folder with the long number, and change one of the numbers to one you like and proceed with the steps from before.

There might be an more easy solution, but for me this one worked out perfectly.

Track Recorder is not working for me. I get an error saying “Unable to start (Possible camera quality setting not supported):start failed”. See screenshot below.

I have tried all the different quality settings.

I have a GSII (International model) running Cyanogen Mod 9 (Jellybean).

Anyone know how to make it work?

yes, on GS2 of a friend the recorder works with official ICS and CM9 (ICS mod), instead with CM10 (Jelly bean) does not works.

In any case with the latest release of track recorder (1.6.28) for me HD recording (720p) is not possible, for the moment I’m using old version (that for me it’s ok).

My mistake. I am running CM9 which is ICS, not Jellybean.

Hello,

I’ve got a Samsung galaxy S2 with ICS 4.0.3 and the latest version of torque and track recorder.
I am facing a problem : When I click on the button “Not recording” to start a recording, the video freezes. The green lights of the differente gauges continue to blink and the button “Not recording” move to “Starting…”. Some seconds later it moves to “Recording” but the picture is still freezed.
I can stop the recording and at the end I can see that no file has been recorded.

It worked well some weeks ago when I tried it the first time.

Could you help me ?

Thanks,

Great program! Full time auto mech and this is faster and easier than my 4k scanner…

Been fiddling with all the options and have found some strange results in trackrecorder. At the beginning and the end of the video the dials seem pretty on par being synced to video, but in the middle of a 10+ min video they seem to be 10-15seconds ahead of the video. If it were lagging Id suspect link/ecm lag but that isnt the case. When you begin the record, all the dials slowly click up into their intended position from zero (over a couple second time) and seem a little slow to respond (not link lag, like theres too much needle lag. But the needle lag is a minor detail, the sync issue however is the real issue. Could this just be a matter of the phone buffering and dropping frames, or an encoder issue? **(EDIT) Just replayed the recording on the phone through track recorder and noticed the dials are off identically to the encoded video.** Too bad key frames cant be matched/inserted with the dial logs. Iv also found the map to be completely inop. It will load the first frame of where you started, and never updates. GPS fix confirmed with high accuracy. Map is fixed position on the phone and the encoded video. **(EDIT) I also just noticed if you look at map view, the gps log works all the way till you hit record, then the rest of the track is missing.** If you need an example of a video or such just ask and Ill make it available.

I keep hearing about an old usb transfer version of sync, hope that comes back. I have only gotten the wifi transfer to complete a couple times, usually resorting to manually transferring the recording folder to the pc, as the wifi transfer will just hang 20-30mb in.

Love the app, and what a price. Less than 30$ and I only pull out the big scanner for enhanced obd needs now. Got a donate button anywhere? Thank you for your efforts!

Htc Inspire @ 1.5ghz
Android Revolution HD 6.3.3
OS ver 2.3.5
16gb class-10 micro sd
Bogus ELM v1.5 that seems to work as intended
96 Ford Probe GT iso9141-2(with a pitifully simple excuse of obd2)

Hi!

Thanks for the feedback! – I’m looking into the syncing issue on the note (and a couple of other devices). I can’t reproduce this issue on my Galaxy Note here which is a bit odd, but have just got back from holiday and it’s early hours yet

Hi

New version is now up on the Google Play store (you may need to reboot to clear google play’s ‘cache’ before you see the new version)

Hopefully this will fix quite a few of the reported issues!