Hello everyone. I am pretty new to Torque so maybe this is an issue with my setup but I have the FORD custom PID set running as well as a few PIDs I hand built from the list of tested PIDs.

Setup:
2011 Ford F350 6.7L Diesel
Kindle Fire HD v6 running Torque App
ELM-327 basic BT adapter

Some PIDS aren’t working correctly and others just aren’t available to be used.

Examples:

My Trans Temp and ECT guages read the same value all the time, but if I look on the built-in display in the truck, they will be different. Usually by a 20/30* colder trans temp as its cold in Nebraska right now. So I think they might be pulling from the same code? maybe?

I built 4 Exhaust Gas PIDs but 11/12 read 122 * and 13/14 read 842* max (once it gets to temp) I know its hotter then that in my exhaust.

I also see dozens of the PIDs in the list when trying to add displays that are black (i.e.: not being read by the OBDII adapter) instead of green (available).

Has any else had issues like this?

Here are PIDs as I have them built on my setup.

Engine Coolant Temperature 1

Done Testing
0105
Engine Coolant Temperature ECT 1 6.7L
ECT 1
0.0
100
x1
°F
(A*(9/5))-40

EGT Post Turbo – EGT 11

Done Testing
22F478
Exhaust Gas Temperature Sensor Post Turbo EGT 11 6.7L
EGT 11
0.0
100
x1
°F
(((B*256)+C)*0.18)-40.0
7E0

EGT Post SCR/Pre DPF – EGT 12

Done Testing
22F478 
Exhaust Gas Temperature Sensor Post SCR/Pre DPF – EGT 12 6.7L
EGT 12
0.0
100
x1
°F
(((D*256)+E)*0.18)-40.0
7E0

EGT Pre DPF – EGT 13

Done Testing
22F478
Exhaust Gas Temperature Sensor Pre DPF – EGT 13 6.7L
EGT 13
0.0
100
x1
°F
(((F*256)+G)*0.18)-40.0
7E0

You get the idea.

Any one who has these PIDs and they work, please let me know your config. I don’t think mine are quite right. Im also trying to determine if its an adapter issue…

Cheers!

Josh