Torque

Forums

Forums

Guest  

Show or hide header
Welcome Guest, posting in this forum require registration.

Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » Toyota Non-CAN TPMS- tricky

Pages: [1]
Author Topic: Toyota Non-CAN TPMS- tricky
LexusGuy111
Member
Posts: 7
Post Toyota Non-CAN TPMS- tricky
on: December 8, 2018 (GMT)

Banging my head against the wall. I thought I had good data. Somehow I got a list of pressures and temperatures that read 30F and about 29-30PSI this morning, and that was correct by techstream. Now I’m getting different stuff. I was running it while techstream was going, maybe that?

Actually testing in a terminal for now. This don’t look like CAN commands to me.

Here is the SG for pressure- (temp is kinda similar, same prefix, different address, standard formula for temp).
TXD 82 2A F0 21 62
or 82 2A F0 21 38

RXF 546180004000

RXD 2808 (increases for each wheel)

MTH 001D0004FF6F (A*27/5-40)/10

Thanks!
cintakc
Member
Posts: 1663
Post Re: Toyota Non-CAN TPMS- tricky
on: December 9, 2018 (GMT)

2006 Land Cruiser

"Name","ShortName","ModeAndPID","Equation","Min Value","Max Value","Units","Header"
"ID1 Temperature in Tire","Temp Tire1","210C","A*5.4-40","-40","212","F","822AF0"
"ID2 Temperature in Tire","Temp Tire2","210C","B*5.4-40","-40","212","F","822AF0"
"ID3 Temperature in Tire","Temp Tire3","210C","C*5.4-40","-40","212","F","822AF0"
"ID4 Temperature in Tire","Temp Tire4","210C","D*5.4-40","-40","212","F","822AF0"

or

"ID1 Temperature in Tire v2","Temp Tire1","2116","A*1.8-40","-40","212","F","822AF0"
"ID2 Temperature in Tire v2","Temp Tire2","2116","B*1.8-40","-40","212","F","822AF0"
"ID3 Temperature in Tire v2","Temp Tire3","2116","C*1.8-40","-40","212","F","822AF0"
"ID4 Temperature in Tire v2","Temp Tire4","2116","D*1.8-40","-40","212","F","822AF0"
"ID5 Temperature in Tire v2","Temp Tire5","2116","E*1.8-40","-40","212","F","822AF0"
"ID1 Pressureure in Tire","Pres Tire1","2126","A*50.66-0.23","0","50","psi","822AF0"
"ID2 Pressureure in Tire","Pres Tire2","2126","B*50.66-0.23","0","50","psi","822AF0"
"ID3 Pressureure in Tire","Pres Tire3","2126","C*50.66-0.23","0","50","psi","822AF0"
"ID4 Pressureure in Tire","Pres Tire4","2126","D*50.66-0.23","0","50","psi","822AF0"
"ID5 Pressureure in Tire","Pres Tire5","2126","E*50.66-0.23","0","50","psi","822AF0"
LexusGuy111
Member
Posts: 7
Post Re: Toyota Non-CAN TPMS- tricky
on: December 9, 2018 (GMT)

Ok Getting warmer. I noticed it works only KOER, has to be running. Before I try in Torque, want to understand the data.

>AT SH 82 2A F0
OK

>21 62 (seems like the adapter is screwing up)
6C 09 00 10 00 00
43 43 1E
44 43 1E

6C 09 00 10 00 00
46 43 1E

6D 09 00 10 00 00
43 43 1E

6F 09 00 10 00 00
49 43 1E
49 43 1E

70 09 00 10 00 00

..Trying this
>AT SP 0
OK

>AT SH 82 2A F0
OK

>AT H0
OK

When I issue (get running data):
>21 26
DC 43 11 00 80
DA 43 11 00 80
D6 43 11 00 80
D6 43 11 00 80
D8 43 11 00 80
DD 43 11 00 80
D8 43 11 00 80
DE 43 11 00 80
DC 43 11 00 80
DD 43 11 00 80
DD 43 11 00 80
DE 43 11 00 80
DC 43 11 00 80
D9 43 11 00 80
DC 43 11 00 80
D9 43 11 00 80
DC 43 11 00 80

>21 16
D5 43 11 00 80
D9 43 11 00 80
DB 43 11 00 80
D5 43 11 00 80
D0 43 11 00 80
CE 43 11 00 80
D3 43 11 00 80
CF 43 11 00 80
CE 43 11 00 80
D5 43 11 00 80
D1 43 11 00 80
D1 43 11 00 80
D5 43 11 00 80
CE 43 11 00 80
D2 43 11 00 80
D7 43 11 00 80
D8 43 11 00 80
D4 43 11 00 80
D8 43 11 00 80
DB 43 11 00 80
D3 43 11 00 80
D3 43 11 00 80

>21 0C
F3 43 11 00 80 81
EE 43 11 00 80 81
F1 43 11 00 80 81
F0 43 11 00 80 81
EF 43 11 00 80 81
F1 43 11 00 80 81
E9 43 11 00 80 81
E7 43 11 00 80 81
DC 43 11 00 80 81
E7 43 11 00 80 81
E0 43 11 00 80 81
E3 43 11 00 80 81
E2 43 11 00 80 81
DE 43 11 00 80 81
DE 43 11 00 80 81
DE 43 11 00 80 81
E1 43 11 00 80 81

DC=35.5F (matches thermometer, yesterday was a bit colder, 3E)
43= 32 psi

But should I be getting both? Could this be a coincidence?

Trying this:

>at L1
OK

>AT H1
OK
>AT S1
OK
>AT AL
OK

>21 16 (don’t look like temps?)

2C4 05 59 43 12 00 80

2C4 05 52 43 12 00 80

2C4 05 54 43 12 00 80

2C4 05 57 44 12 00 80

2C4 05 59 44 12 00 80

2C4 05 5A 44 12 00 80

2C4 05 57 44 12 00 80

2C4 05 5C 44 12 00 80

2C4 05 5C 44 12 00 80

>21 0C

2C4 05 20 44 12 00 80

2C4 05 27 44 12 00 80

2C4 05 27 44 12 00 80

2C4 05 2F 44 12 00 80

2C4 05 2E 44 12 00 80

2C4 05 23 44 12 00 80

2C4 05 24 44 12 00 80

2C4 05 27 44 12 00 80

2C4 05 28 44 12 00 80

2C4 05 29 44 12 00 80

2C4 05 29 44 12 00 80
cintakc
Member
Posts: 1663
Post Re: Toyota Non-CAN TPMS- tricky
on: December 9, 2018 (GMT)

atsp5
atsh822af1
210c
2116
LexusGuy111
Member
Posts: 7
Post Re: Toyota Non-CAN TPMS- tricky
on: December 9, 2018 (GMT)

Thanks-
Did ATZ beforehand…

Got a BUS ERROR. For that protocol. Actually tried a few other protocols (Thought it was ISO-9141) and got the same result.

I also tried AT SI and it isn’t supported.

BAFX Elm 1.5 adapter.
cintakc
Member
Posts: 1663
Post Re: Toyota Non-CAN TPMS- tricky
on: December 10, 2018 (GMT)

we are trying to figure out something, but you didn’t even say what car it was about
LexusGuy111
Member
Posts: 7
Post Re: Toyota Non-CAN TPMS- tricky
on: December 10, 2018 (GMT)

Sorry, it is a 2011 Lexus GS.
I believe though these codes should work from 04-13 on many Toyotas with direct TPMS. They started with the 04 Rav 4 I believe. Your example is from a Land Cruiser.

Electrically the TPMS module is connected to the gateway computer and I believe that ends up on pin 7.
cintakc
Member
Posts: 1663
Post Re: Toyota Non-CAN TPMS- tricky
on: December 10, 2018 (GMT)

try this:
atib96
atsp5
atsh822af1
210c
2116

or
atib96
atsp4
atiia2a
atsh822af1
210c
2116
LexusGuy111
Member
Posts: 7
Post Re: Toyota Non-CAN TPMS- tricky
on: December 10, 2018 (GMT)

Thanks so much!
I’ll be trying this a bit later today.
I know for sure pin 7 works on my adapter. I have a 96 explorer and I can read abs speed, read abs codes. It uses the ISO protocol.
LexusGuy111
Member
Posts: 7
Post Re: Toyota Non-CAN TPMS- tricky
on: December 10, 2018 (GMT)

Not good :lol:.
Like I said, it definitely supports ISO/Pin 7 because of the Ford.

>atib96
OK

>atsp5
OK

>atsh822af1
OK

>210c
BUS INIT: ERROR

>2116
BUS INIT: ERROR

>atz

ELM327 v1.5

>atib96
OK

>atsp4
OK

>atiia2a
OK

>atsh822af1
OK

>210c
BUS INIT: …ERROR

>2116
BUS INIT: …ERROR

>
cintakc
Member
Posts: 1663
Post Re: Toyota Non-CAN TPMS- tricky
on: December 10, 2018 (GMT)

I met several times with the fact that the Chinese analogs of adapters do not connect to some blocks of ISO14230-4, because they cannot issue TiniL/TiniH = 35/15 ms
TiniL/TiniH = 35/15 ms – required for Toyota
TiniL/TiniH = 25/25 ms – default for adapter ELM327
Chinese adapters ELM327 can not issue 35/15 ms
branded adapters have the ability to set TiniL/TiniH = 35/15

example: 4Runner GRJ215 TPMS exactly the same protocol could only connect with the branded adapter, having built in it TiniL/TiniH = 35/15 ms
LexusGuy111
Member
Posts: 7
Post Re: Toyota Non-CAN TPMS- tricky
on: December 10, 2018 (GMT)

THanks, very helpful for myself and others.

I did more research, even OBD Link MX can’t do it.
https://www.scantool.net/forum/index.php?topic=15107.msg54284#msg54284

They are working on the fix, that will open up a ton of pids.

Which adapters can do this?

No one is using original ELM chips.
cintakc
Member
Posts: 1663
Post Re: Toyota Non-CAN TPMS- tricky
on: December 11, 2018 (GMT)

here are two examples of adapters with a proprietary chip
https://elm-327.eu/
https://ru.aliexpress.com/item/2016-New-Update-ELM327-WIFI-ELM327-USB-Scanner-Diagnostic-Tool-ELM-327-Wifi-OBD-ii-Support/32681596517.html
Pages: [1]
WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.042 seconds.

  Follow me on twitter