Torque

Forums

Forums

Guest  

Show or hide header
Welcome Guest, posting in this forum require registration.

Torque » Torque OBD ECU Scanner » Torque Discussion / Ideas » Corolla/Matrix transmission temperature

Pages: [1]
Author Topic: Corolla/Matrix transmission temperature
Tracteur
Member
Posts: 5
Post Corolla/Matrix transmission temperature
on: June 16, 2018 (GMT)

Hi!

I’m planning to tow a small camptrailer with my 2013 Toyota Matrix A4. I would like to monitor the transmission temperature or atf temp. I’m using a Veepeak OBD2 reader with Torque (lite version for now). I added a custom PID using 2182 or 21d9 but i still get “no data”. Other default sensors work ok. Here the formula used:

(((((A*256)+B)*(7/100)-400)/10)-32)*(5/9)
Minimum value:0.0
Maximum value:150
Scale facor: x1
Unit type: C

Any help would be greatly appreciated!

2013 Toyota Matrix Aut
cintakc
Member
Posts: 1667
Post Re: Corolla/Matrix transmission temperature
on: June 16, 2018 (GMT)

you try the correct PIDs, it is possible to use other letters in the formula
post the hex answers in the Test Mode of these PIDs
2AZFE – 2182
2ZRFE – 21D9
Tracteur
Member
Posts: 5
Post Re: Corolla/Matrix transmission temperature
on: June 18, 2018 (GMT)

Test mode of the PIDs ??

2013 Toyota Matrix Aut
Capp777
Member
Posts: 2997
Post Re: Corolla/Matrix transmission temperature
on: June 18, 2018 (GMT)

If you “Test” your custom pid in the pid editor
while connected to your vehicle the raw hex response
will show which variables are responding to your
TFT.

The following thread is using E, F, G and H which is
different than the A and B in your previous post.

https://torque-bhp.com/forums/?wpforumaction=viewtopic&t=3585.1
Tracteur
Member
Posts: 5
Post Re: Corolla/Matrix transmission temperature
on: June 19, 2018 (GMT)

OK, I’ll try this “test” and get back to you.
(btw, i’m still using the LITE version, should it be the same procedure??)
Thanks.

2013 Toyota Matrix Aut
Capp777
Member
Posts: 2997
Post Re: Corolla/Matrix transmission temperature
on: June 19, 2018 (GMT)

That maybe part of the issue as I don’t believe
“Lite” has a Header field or TEST capability.

Don’t know if Lite is limited to the functional
addressing used by mode 01 pids?

You are trying to access custom mode 21xx pids
which use physical addressing.

I highly recommend:

Torque Pro.
Torquescan
Track Recorder

Edit:

Noticed that Lite version does come with
a predefined GM pid set but without the ability
to set Header values.
Tracteur
Member
Posts: 5
Post Re: Corolla/Matrix transmission temperature
on: June 24, 2018 (GMT)

Thanks Capp777,

I’ll get the pro version, there is no “test” or “header” in the lite version.

2013 Toyota Matrix Aut
Tracteur
Member
Posts: 5
Post Re: Corolla/Matrix transmission temperature
on: July 9, 2018 (GMT)

I finally bought the complete version of Torque and used the pre-defined Transmission Temperature (Method 3) with PID 2182, and it works just fine!!!

Thanks, and I hope some other people will find this information helpful!

2013 Toyota Matrix Aut
Pages: [1]
WP-Forum by: Fredrik Fahlstad, Version: 2.4
Page loaded in: 0.029 seconds.

  Follow me on twitter