hey sorry to bust in here.....but i have a 2006 evo mr too....what do i need to get to where you're at...lol.....just downloaded the app to my droid x

Hi

What display are you using? The 'Turbo Boost' one?

Can you try the 'Intake Manifold Pressure' and tell me what reading it supplies? (either in kPa or PSI) - that'll help me pinpoint if your ECU is already compensating for ground level air pressure

Thanks

Ian

Yes i am using the turbo boost display. Seems to function correctly, but then stops at 3.1 PSI.

I tried intake pressure the other day but am not familiar with kPa so don't remember what values I was getting. I will go out in a bit and report back.

Thanks

Any way to switch the manifold pressure to PSI instead of kPA?

Ignition on, car not running = 100kPa
Idle= ~39 kPa
Max pressure I saw during a quick trip around block was 123 kPa

Which tells me the 100 is atmospheric pressure, and boost was 23 kPa over ATM wich is like ~3.3 PSI......so same deal as Boost reading on Torque..

Please help, as this was purchased and boost is VERY important data to be checked and logged.

Thanks

Used my dongle and App on someone elses vehicle and boost read normal. Any idea what is wrong with the EvoIX functionality?

ttt

I have the same problem. Anyone figure this out yet? Exo ix max boost only shows 3.1