Torque

Forums

Forums

Notifications
Clear all

triptime

13 Posts
9 Users
0 Reactions
1,424 Views
(@clayton4115)
Posts: 4
Active Member
Topic starter
 

hi thanks so much for this great app, just one question, I am using the triptime display which works when the car connects to the obd2 however once i finish my trip and put the car off, the trip time still keeps ticking is there a way to stop the trip time when the ignition goes off.

thanks

 
Posted : 10/01/2014 6:21 am
(@capp777)
Posts: 2999
Famed Member
 

There is a "ignore short gap" toggle
under data logging settings that might
help. (I have not tested this though).

 
Posted : 10/01/2014 10:21 am
(@clayton4115)
Posts: 4
Active Member
Topic starter
 

thanks i will try this, however it sounds it says "dont reset the trip if you lose connection temporarily or stop to purchase fuel"

so i do not think this will make a difference

 
Posted : 10/01/2014 9:58 pm
(@capp777)
Posts: 2999
Famed Member
 

Which implies to me that trip timer will
continue running for 10 minutes without
stopping assuming the trip will be resumed,
but I could be wrong.

 
Posted : 10/01/2014 10:16 pm
(@clayton4115)
Posts: 4
Active Member
Topic starter
 

thanks, but i want it to stop after the ignition is switched off.

 
Posted : 10/01/2014 11:40 pm
(@clayton4115)
Posts: 4
Active Member
Topic starter
 

another issue is the time since starts counts in seconds if you use the widget and have it on your home screen, it is ok as a function within the app as it is mins:secs however as soon as it is a widget it counts in seconds only and not mins:secs.

 
Posted : 11/01/2014 5:31 am
(@countryjohn)
Posts: 2
New Member
 

Seconds only displayed. Mine does not roll over at 60 seconds to show one minute. It keeps going so last "trip" was about 16,000 seconds. Why is this not coded correctly?

 
Posted : 04/01/2019 4:12 pm
(@davegrips)
Posts: 2
New Member
 

Having the same issue. Trip times used to display mm:ss then i factory reset the tablet l, reinstalled everything and now the trip time only shows seconds. Why does it work some times and not others.

OK this seemed to work for me. Add the trip time whilst moving or any trip time display. Your first instinct is to use the digital display type. that's what i use anyway. Don't use that one. use the bar display or the graph display. then pick the size and place it. then drive around a a little with it running. Now i did the next things while moving. long pressed the display (trip time) display configuration...change display type to the digital display. and now for some reason the readout will be in MM:SS not just seconds.

 
Posted : 25/01/2019 12:36 am
(@xusn96)
Posts: 5
Active Member
 

Have same issue will try a different type other than digital. I know this worked properly in an earlier https://photos.google.com/share/AF1QipO11jxMSGFuGj7R5cCvBBRiaTCgB0IDxhiuLpiGTHAzYusvMirlL6gHR1u9YYLZmQ?key=ZDg0VnotZTF5U1FpeVdqMmR6Wl9QNlZRX0hxc0pB

 
Posted : 26/06/2019 2:08 pm
(@jazzbass)
Posts: 5
Active Member
 

I'm facing the same issue.

I'll give the bar display while moving, driving, then changing back and see if that works.

Thanks for the suggestion!
JB

 
Posted : 03/07/2019 3:03 pm
(@admin)
Posts: 6550
Member Admin
 

Hi!

This may be a bug, I'll look at it this week and will try to get it out in the next beta update (late this week with a bit of luck!)

 
Posted : 03/07/2019 3:04 pm
(@davidcbittner)
Posts: 3
Active Member
 

Has this ever been fixed so you don't have the crazy work around? Drive around and much with the display that's pretty crazy. I installed the pro app about a month ago and had not looked at the trip time until now. It only displays in seconds.

 
Posted : 14/06/2021 11:57 am
(@steve_p)
Posts: 19
Eminent Member
 

Why are my posts all blank and blocked?

 
Posted : 17/06/2021 3:00 pm
Share:

  Follow me on twitter