Torque not connecting to my Suzuki Liana's ECU. HELP!!! - Torque main forum https://torque-bhp.com/community/main-forum/torque-not-connecting-to-my-suzuki-lianas-ecu-help/ Torque Discussion Board en-US Thu, 11 Jun 2026 16:50:35 +0000 wpForo 60 RE: Torque not connecting to my Suzuki Liana's ECU. HELP!!! https://torque-bhp.com/community/main-forum/torque-not-connecting-to-my-suzuki-lianas-ecu-help/#post-45912 Tue, 10 Jun 2025 23:51:37 +0000 @admin 

First of all thank you so much for responding.

The ECU (car icon) icon keeps blinking not the obd adapters light 

Adapter icon stays solid.

 

]]> Torque main forum Huntygreat https://torque-bhp.com/community/main-forum/torque-not-connecting-to-my-suzuki-lianas-ecu-help/#post-45912 RE: Torque not connecting to my Suzuki Liana's ECU. HELP!!! https://torque-bhp.com/community/main-forum/torque-not-connecting-to-my-suzuki-lianas-ecu-help/#post-45909 Tue, 10 Jun 2025 09:18:18 +0000 Hi!

If the adapter icon is blinking continually, then it means the app isn't able to connect to the adapter which could mean that you have the wrong adapter selected in the settings, or, that the adapter is already connected to another app/device

Once the app is connected to the adapter, the car icon will blink whilst the adapter establishes a link with the ECU, and then all should stay on solid on OBD2 vehicles

]]> Torque main forum piemmm https://torque-bhp.com/community/main-forum/torque-not-connecting-to-my-suzuki-lianas-ecu-help/#post-45909 Torque not connecting to my Suzuki Liana's ECU. HELP!!! https://torque-bhp.com/community/main-forum/torque-not-connecting-to-my-suzuki-lianas-ecu-help/#post-45902 Sun, 08 Jun 2025 23:17:12 +0000

I have a Suzuki Liana.

I have been trying for days to get the connection working, changed 3 obd adapters 

After looking for fixes,  came to know about app SZ viewer A1

The data shows up in SZ viewer A1 like rpm, injector , coolant etc but torque pro doesn't connect with ecu

The ecu icon keeps blinking 

I tried adding the PIDS you shared but still no connection.

Here is the SZ viewer A1 screenshot : removed link

It uses K-line Which should be supported by torque pro so I dont know the issue.

The OB2 adapter is a good quality one i have tested it with Toyotas and Hondas of my friends 

ANY Help would definitely be appreciated as my use is specific to torque.

]]> Torque main forum Huntygreat https://torque-bhp.com/community/main-forum/torque-not-connecting-to-my-suzuki-lianas-ecu-help/#post-45902